Module RS-485 & Ethernet DCON 8 khe cắm module I/O ICP DAS I-8KE8 CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

8-slot Ethernet I/O Expansion Unit with 80186-80 CPU, 1 Serial Port and 1 Ethernet Port (DCON Protocol) (Blue Cover)

Gọi +84 904251826 để được trợ giúp

Module RS-485 & Ethernet DCON 8 khe cắm module I/O ICP DAS I-8KE8 CR

Features

• 80186 or compatible (16-bit and 80 MHz)
• MiniOS7 Embedded Operating System (DOS-like)
• Slave I/O unit with DCON protocol (ASCII-based protocol )
• Support I/O configuration with DCON Utility via Ethernet(VxComm Port)
• Simultaneous access by a maximum of 6 host PCs
• Built-in Watchdog
• 7-Segment display x 5
• Input Protection circuitry
• 8 Slots for I-8K and I-87K Modules
• Operating Temperature: -25 ~ +75 °C

Introduction

The I-8KE4/I-8KE8 is an embedded Ethernet I/O units using DCON Protocol Firmware.ICPDAS provides various I/O modules, such as analog input/output, digital input/output and counter/frequcncy modules, which can be used in remote data acquisition and control applications for environment monitoring, power management and factory automation, etc via Ethernet Port or RS-232 Port.

The CPU is a 16-bit 80186-80 (80 MHz). Apart from the original functions (input, output, power on value, safe value, high limit value, low limit value) of the I/O module, the firmware provides additional functions to allow I/O modules in different slots to be combined together. For example, if the channel value of an AI module is above a predefined high limit value, or below a predefined low limit value, the information can be immediately passed to another DO module to trigger alarm or light.

Various software development kits (SDK) and demos are provided, such as DLL, Labview driver, Indusoft driver, Linux driver, OPC server, etc. Although all the SDK drivers support only COM Port interface,users can also use there SDK by installing the VxComm Utility .  VxComm Utility can create Virtual COM Port to map the Ethernet Port, then the I/O modules can be easily added to the I-8KE4/I-8KE8 and can be quickly integrated into an existing system.

Applications

  • Factory, Building and Home Automation Remote Maintenance.

Specifications

Software
Protocol DCON
CPU Module
CPU 80186 or compatible, 16-bit and 80 MHz
EEPROM 2 KB
Flash 512 KB
SRAM 512 KB
Watchdog Timer Yes
Display
Type 5 x Digit 7 Segment LED Display
LED Indicators
Status 3 x Programmable
I/O Expansion
I/O Type I-87K series
Slots 8
COM Ports
Ports 1 x RS-232
HMI
Push Button 4
Ethernet
Ports 1 x RJ-45, 10Base NE2000 compatible
Power
Input Range +10 ~ 30 VDC (3 kV Isolated )
Consumption 5.1 W
Mechanical
Dimensions (mm) 354 x 110 x 75.5 (W x L x H)
Installation DIN-Rail, Wall mounting
Environment
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +85 °C
Humidity 5 ~ 95 % RH, Non-condensing

Download

Datasheet

Documents

Ordering Information

I-8KE8     CR  8-slot Ethernet I/O Expansion Unit with 80186-80 CPU, 1 Serial Port and 1 Ethernet Port (DCON Protocol) (Blue Cover) (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: