Board kết nối 16 kênh đầu ra Relay ICP DAS DN-DO-16DR-A CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

Termination board for digital output with high EMS protection and removable relay

THÔNG TIN SẢN PHẨM

Features

Introduction

The DN-DO-16DR-A & DN-DO-16DR-B are termination boards with relay (Form C, SPDT) output. The DN-DO-16DR-A is used for digital output channel 0~15, and the DN-DO-16DR-B is used for digital output channel 16~31. These boards offer 2 output for each channel to extend control logic due to the Form C relay, it can be positive (N.O.) or negative (N.C.) logic output or both. In addition, each channel is built-in two varistors on N.O. and N.C. channel to protect against high-voltage transients and surges to the control loop.

PIN Assignments

Wiring

Applications

Building Automation
Factory Automation
Machine Automation
Remote Maintenance
Remote Diagnosis

Specifications

Digital Output
Type	Form C Relay

Relay Output
Contact Rating	Contact configuration: SPDT; Rated current/Max. peak current: 6 A/10 A; Rated voltage/Max. switching voltage: 250 VAC/400 VAC; Minimum switching Load: 300 mW
Operate Time	8 ms
Release Time	5 ms
Mechanical Endurance	20 x 10^6

Mechanical
Dimensions (mm)	126.6 x 274.6 x 25.5
Installation	DIN-Rail & wall mounting

Environment
Operating Temperature	-25 ~ 75 °C
Humidity	5 ~ 95% RH, Non-condensing

Download

Datasheet

Documents

Ordering Information

DN-DO-16DR-A CR

Termination board for digital output with high EMS protection and removable relay (Ch0 ~ 15) (RoHS)

Board kết nối 16 kênh đầu ra Relay ICP DAS DN-DO-16DR-A CR

PIN Assignments

Wiring

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng