Bộ xử lý và lưu trữ dữ liệu Data Logger 2 cổng CAN Bus ICP DAS CAN-Logger200 CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

2-port CAN Bus Data Logger Device

THÔNG TIN SẢN PHẨM

Feature

Compatible with CAN specification 2.0 parts A and B
2500 Vrms photocoupler isolation on the CAN side
Full compatible with the ISO 11898-2 standard
Supports CAN bus acceptance filter configuration
Max. CAN data flow for a single channel is 15000 fps
Programmable CAN bus baud rate from 10 kbps ~ 1Mbps
USB 2.0 High Speed Compatibility
Supports 4 to 32 GB SDHC type flash for saving CAN messages
Built-in jumper for the 120 Ω terminal resistor of the CAN side
Power by the USB port or CAN port
3 kV galvanic isolation for the CAN port
Provides a configuration utility that can be used to transmit/receive CAN messages

Introduction

The CAN-Logger200 are high-performance intelligent CAN bus data logger device with one/two CAN port that can help to make data collection and to process on a CAN bus network easier and quicker. The powerful CPU of the CAN-Logger devices provide the accurately time-stamp for each CAN message and supports storage media like SD or SDHC type flash for saving these CAN messages that is useful to analysis and diagnostic the CAN Bus network. In order to enhance the portability of the CAN-Logger200, this module is powered by the USB interface or M12 connectors of CAN bus interface. The CAN-Logger devices use the standard USB HID driver of the Windows system.

Application

Control System
Building Automation
Factory Automation
Distributed data acquisition

Specifications

Data Logger
Trigger	Log continuously
Time Stamp	10 us
Storage Media	SDHC type flash – support 4 to 32 GB
File Format	Binary
Configuration	Utility tool

LED Indicators
Status	1 x Power 1 x Module status 1 x SD status 3 x CAN status

USB
Specification	USB 2.0 High Speed
Transfer Speed	480 Mbit/s, High Speed mode
Connector	1 x USB (Type B) (Utility port)
Driver	Built-in Windows 7/8.1/10

CAN
Ports	2
Baud Rate	10 k ~ 1 M bps
Isolation	3000 VDC for DC-to-DC, 2500 Vrms for photocoupler
Terminal Resistor	DIP switch for the 120 Ω terminal resistor
Specification	ISO-11898-2, CAN 2.0A and CAN 2.0B
Filter	Yes
Pin Assignment	2 x 5-Pin male M12
Data Flow	15000 fps for Rx

Power
Input Range	+10 VDC ~ +30 VDC or USB power delivery
Consumption	2.5 W

Mechanical
Casing	Metal
Dimensions (mm)	102 x 102 x 44 (W x L x H)
Installation	Wall Mount

Environment
Operating Temperature	-25 ~ +75 °C
Storage Temperature	-30 ~ +80 °C
Humidity	10 ~ 90% RH, Non-condensing

Download

Datasheet

Documents

Ordering Information

CAN-Logger200 CR

2-port CAN Bus Data Logger Device (RoHS)

Bộ xử lý và lưu trữ dữ liệu Data Logger 2 cổng CAN Bus ICP DAS CAN-Logger200 CR

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng