Bộ chuyển đổi Port-powered RS-232 sang RS-485 3Onedata SW485WA

Thương hiệu: 3Onedata | Tình trạng: Còn hàng
Liên hệ

Port-powered RS-232 to RS-485 Converter

Gọi +84 904251826 để được trợ giúp

Bộ chuyển đổi Port-powered RS-232 sang RS-485 3Onedata SW485WA


Support bidirectional data conversion between 1 RS-232 serial port and 1 RS-485 serial port 

Support 1500V photoelectric isolation

Unique port-power technology, no need for external power supply

The rate is up to 38400bps, support 128 nodes

Automatic serial port signal rate detection, zero-delay automatic forwarding

Support -40~80℃ wide operating temperature range

Compact size, easy installation


SW485WA is an industrial-grade pocket RS-232 to RS-485 interface converter, which can implement bidirectional data conversion between serial port RS-232 and RS-485, and provide 1500V photoelectric isolation protection without the need of external power supply. It provides a RS-232 serial port and a RS-485 serial port equipped with 600W surge protection and 15kV electrostatic protection, which can effectively prevent device from being damaged.

The RS-232 port of SW485WA adopts hole-type DB9 interface, which could connect to PC directly and obtain power from PC serial port via TXD, RTS and DTR signal lines. RS-232/485 bidirectional conversion could be implemented, even though it’s only powered by TXD signal. Regardless of whether the signal is high or low, SW485WA can obtain enough power from those data/handshake signals.

The design of SW485WA complies with the requirements of industrial standard. It could be wildly used in electric power system, industrial automation control and IC card charging system. 


Serial Port  


Standard: EIA RS-232C, RS-485

Serial port quantity: 1 RS-232 serial port, 1 RS-485 serial port 

RS-232 signal: TXD, RXD, GND

RS-485 signal: D+, D-, GND

Interface type: RS-232 serial port, adopts DB9, Female

RS-485 serial port, adopt 3-pin terminal blocks

Transmission distance: RS-232 serial port, 15m

RS-485 serial port, 1200m

Direction control: RS-485 adopts automatic data flow control technology which can detect and control data transmission direction automatically 

Load capacity: RS-485 supports 128-point polling environment

Interface protection: 600W surge protection, 15kV electrostatic protection

Photoelectric isolation: 1500V









No external power supply required

Device obtains power from TXD, RTS, DTR signals of RS-232 serial port







Static power consumption: ≤20mA

Dynamic power consumption(mean): ≤50mA







Operating temperature: -40~80℃

Storage temperature: -40~85℃

Relative humidity: 5%~95%(no condensation)







Housing: plastic

Dimension (W x H x D): 82mm×33mm×16.5mm

Weight: 50g







3 years



SW485WA Datasheet 

Ordering Information

Available Models RS-232  RS-485 Power Supply
SW485WA 1 1

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: