Bộ chuyển đổi J1939 sang Modbus TCP Server/RTU Slave ICP DAS GW-7238D-G CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

J1939 to Modbus TCP Server / RTU Slave Gateway

Gọi +84 904251826 để được trợ giúp

Bộ chuyển đổi J1939 sang Modbus TCP Server/RTU Slave ICP DAS GW-7238D-G CR

Features

  • Built-in jumper to select 120 ohm terminal resistor
  • Watchdog inside
  • Transmission and reception of all types of J1939 messages, including PDU1, PDU2, broadcast and destination specific
  • J1939 Transport Protocol for transmission and reception of large messages (9 - 1785 bytes)
  • Supports BAM of Connection Management Message
  • Network addresses management
  • Supports Modbus TCP server / RTU slave protoco

Introduction

The GW-7238D is a gateway that provides conversion between J1939 and Modbus TCP/RTU protocol. For J1939 network, the GW-7238D supports PDU1, PDU2, broadcast and destination specific type of J1939 messages. For Modbus TCP/RTU network, the GW-7238D is a Modbus TCP server / RTU slave to reply the request from Modbus TCP client / RTU master. Utility software is provided for users to configure J1939 and Modbus TCP/RTU setting in the GW-7238D. The application fields can be diesel power-train applications, In-Vehicle networks for trucks and buses, etc.
The following figure shows the application architecture for the GW-7238D

Applications

  • Diesel power-train applications
  • Diesel power-train applications
  • In-Vehicle networks for trucks and buses
  • Truck-Trailer connections
  • On Board Diagnostics
  • Vehicle Automation

Specifications

CPU Module
CPU 80186, 80 MHz or compatible
LED Indicators
Status PWR / J1939 / MODBUS / ERR
COM Ports
Ports 1 x RS-232
1 x RS-485 (Self-turner inside)
Baud Rate 9600, 19200, 38400, 57600, 115200
Protocol Modbus RTU
Ethernet
Protocol RJ-45 with LED indicator / Modbus TCP
J1939
Controller NXP SJA1000T with 16 MHz clock
Ports 1
Baud Rate 250 k
Isolation 1000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Terminal Resistor Jumper for 120 Ω terminal resistor
Specification ISO-11898-2, CAN 2.0A and CAN 2.0B
Power
Consumption 2 W
Mechanical
Dimensions (mm) 122 x 72 x 33 (L x W x H)
Installation DIN-Rail
Environment
Operating Temperature -25 ~ +75 ℃
Storage Temperature -30 ~ +80 ℃
Humidity 10 ~ 90% RH, Non-condensing

Download

Datasheet

Documents

Ordering Information

GW-7238D-G     CR  J1939 to Modbus TCP Server / RTU Slave Gateway included CA-0910 cable (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: