3-axis Stepper/Servo Motion Control Terminal Borad ICP DAS DN-8368GB CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

3-axis Stepper/Servo Motion Control Terminal Borad, for General Purpose

Gọi +84 904251826 để được trợ giúp

3-axis Stepper/Servo Motion Control Terminal Borad ICP DAS DN-8368GB CR

Features

• High Speed Photo-coupling Isolated.
• Supporting Pulse Command Type Step Motors or Servo Motors.
• Providing Power LED and Other Status LEDs (Home, Limit Switches, …)

Introduction

The DN-8368 series is a daughter-board that is designed for ICP DAS’s 6-axis motion controllers, such as PISO-PS600, PISO-VS600 and PMDK. Each DN-8368xB supports 3-axis and two DN-8368xB are required to support 6-axis. The DN-8368GB is designed for general purpose usage while the DN-8368MB is designed to be easily connected with Mitsubishi MINAS-J2S series servo amplifier. It is not only a screw terminal board for easy connection of signals; it also provides on-board isolating circuitry to protect the controllers. Interface signals are divided into three groups. Each group corresponds to a single axis and contains the necessary pulse output command lines, encoder feedback lines, mechanical switch inputs (Home, near home, limit -switches) and some servo input/output interfaces (Srv_On, ERC, ALM_RST, RDY, Alarm, INP). Terminal connectors are used for easy wiring purpose. Users can interchange connectors to interchange each axial definition without laborious rewiring. This board also contains on-board power module which provides different voltages for other on-board circuitry.

Specification

Power
Input Range 20 ~ 26 VDC, 0.5 A
Consumption 12 W (24 VDC)

 

Mechanical
Dimensions (mm) 162 mm X 107 mm

 

Environmental
Operating Temperature -20 ~ +75 °C
Storage Temperature -30 ~ +85 °C
Humidity 10 ~ 90% RH, Non-condensing

Download

Datasheet

Documents

Ordering information

DN-8368GB     CR  General Purpose Wiring Terminal Board

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: