Bo mạch kết nối 4 kênh đầu ra Relay ICP DAS DN-PR4/N

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

4-ch Power Relay Board (Pitch= 5.08 mm)

THÔNG TIN SẢN PHẨM

Features

4 Form C Relays (SPDT)
Industrial wiring terminals for easy output wiring
Switch up to 5A at 250VAC/5A at 30VDC
LEDs indicated relay status
Build-in diodes to protect from wrong connection of external power supply.
Designed Varistor to protect each channel’s high voltage spike
Connects directly to I-7000 modules, ISO-730 isolated output,ISO-C64 output, ISO-P32C32 isolated output…etc.

Introduction

The DN-PR4 Features a DIN-rail mount and four form C electromechanical power relays for efficient switching of load by programmed control. The contact of each relay can control a 5 A load at 250VAC/30VDC. The relay is energized by applying a +24V voltage signal to the appropriate relay channel. Each output is equipped with a LED to display their status. Each output is equipped with a varistor that shunts the surge voltage of the inductive load or electromagnetic brake to protect the relay contact point. All relay control and relay outputs are accessible through the wiring terminals.

Specification

Relay Output
Channels	4 X FORM C
Type	24 V Power Relay
Contact Rating	5 A @ 250VAC / 30 VDC
Operate Time	10 ms
Release Time	5 ms
Electrical Endurance	1 x 10^5
Mechanical Endurance	1 x 10^7

Power
Consumption	2.2W

Mechanical
Dimensions (mm)	103 mm x 86 mm x 30 mm (W x L x H)
Installation	DIN-rail mounting

Environmental
Operating Temperature	0 ~ 60°C
Storage Temperature	-20 ~ 70°C
Humidity	5% to 90 % noncondensing

Ordering information

DN-PR4/N CR

4-ch Power Relay Board (Pitch= 5.08 mm) without DIN-rail Mounting (RoHS)

Bo mạch kết nối 4 kênh đầu ra Relay ICP DAS DN-PR4/N

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng