Module EtherCAT Slave 2 kênh đầu vào bộ đếm Encoder ICP DAS ECAT-2092T CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

Two-Channel Incremental Encoder Counter with Latch and Compare Function

Gọi +84 904251826 để được trợ giúp

Module EtherCAT Slave 2 kênh đầu vào bộ đếm Encoder ICP DAS ECAT-2092T CR

Tính năng

• EtherCAT slave
• Two channels, 32-bit incremental encoder counters
• Encoder counting mode: CW/CCW, Pulse/Direction, A/B Phase
• Maximum counting rate: 4 MHz
• Encoder Input: A, B, C differential or single-ended signals
• Two digital input for counter latching
• Two digital output for position compare signal trigger: single, auto-increment and array compare
• Encoder digital input filter
• Input level:  5V, 12V/24V with internal resistor
• Polarity setting by software for active high or active low encoder input
• A/B/C signal isolation voltage: 2500V optical isolation

Giới thiệu

The EtherCAT slave ECAT-2092T is an incremental encoder counter which provides two independent high-speed counter channels. It reads the pulse train generated by an incremental encoder and can be used in positioning feedback applications. Each channel has two counter (A, B) and one index inputs (C). The inputs can either be single-ended or differential signals. Three counting modes are supported: clockwise/counterclockwise, pulse/direction and quadrant counting mode. Each 32-bit counter and the trigger level  (falling/rising edge) can be configured and set by software. 

In addition to the encoder inputs A, B and C, a latch input I for each encoder channel allows the latching and clearing of each encoder counter. Encoder position are latched at rising and falling input signal and are recorded in two separate register. 

The ECAT-2092T supports position compare: Each encoder channel is equipped with one 32-bit compare register which compares the counter position with the compare position and generates an output signal when the counter reaches or passes the compare position. The compare function supports single, auto incremental and array position compare. The pulse width of the compare output can be set. 

Each channel has got an adjustable input signal filter for filtering out electrical noises.

Ứng dụng

• Position measurement
• Image capture
• Automated optical inspection
• Line-scan vision inspection
• Data acquisition

Thông số kỹ thuật

EMS Protection
EFT (IEC 61000-4-4) Signal: 1 KV Class A; Power: 1 KV Class A
ESD (IEC 61000-4-2) 4 KV Contact for each channel
Surge (IEC 61000-4-5) 1 KV Class A
LED Indicators
Status 1 x Power
1 x Operation State
2 x Communication
8 x DI status
 
Encoder Input
No. of Axes 2, differential or single-ended
Resolution 32 Bit
Programmable Digital Filter 1 ~ 250 μs
Photo-isolation 2500 VDC
Mode A/B Phase, CW/CCW, Pulse/Dir
Input Level 5V (default)
12V/24V with internal resistor (set by jumper)
Frequency 4 MHz Max.
Compare Trigger Output
Channels 2
Load Voltage 5 ~ 48 V
Max. Load Current 100 mA
Trigger Pulse Width 2 ~ 32,767 μs
External Latch Input
Channels 2
Input Level 5V (default)
12V/24V with internal resistor (set by jumper)
EtherCAT
Ports 2 x RJ-45
Distance Between Stations 100 m Max. (100Base-TX)
Data Transfer Medium Ethernet/EtherCAT cable (Min. CAT5), shielded
Cycle Time 0.5 Millisecond
Distributed Clocks Yes
Power
Input Range +20 VDC ~ +30 VDC
Consumption 4.5 W Max.
Mechanical
Casing Plastic
Dimensions (mm) 33 x 127 x 108 (W x L x H)
Installation DIN-Rail
Environment
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing

Download

Data sheet

Documents

Thông tin mua hàng

ECAT-2092T     CR  EtherCAT two-channel incremental encoder counter with compare trigger output (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: