Module 2 cổng Ethernet Modbus TCP 12 kênh DI + 6 kênh DO ICP DAS ET-7250A CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

Ethernet I/O Module with 2-port Ethernet Switch, 12-ch DI and 6-ch DO

Gọi +84 904251826 để được trợ giúp

Module 2 cổng Ethernet Modbus TCP 12 kênh DI + 6 kênh DO ICP DAS ET-7250A CR

Features

  • Built-in Web Server
  • Web HMI
  • Support for both Modbus TCP and Modbus UDP Protocols
  • Communication Security
  • 2-port Ethernet Switch for Daisy-Chain Topology
  • Dual Watchdog
  • Wide Operating Temperature Range: -25 ~ +75°C
  • I/O Pair Connection
  • Built-in I/O
    • DI/Counter: 12 Channels
    • DO: 6 Channels

Introduction

The ET-7000/ET-7200 series provides full networking capabilities, and a variety of I/O functions, together with web based Ethernet I/O monitoring and control modules, meaning that the modules can be remotely controlled using the Modbus TCP/UDP protocol via an Ethernet network. This ensures that the ET-7000/ET-7200 series provides integration with HMI, SCADA, PLC and other industrial control software systems. The ET-7250A includes two built-in Ethernet switch ports, which help to reduce implementation costs as there is no need to install an additional switch in order to daisy chain the ports or to extend the network via the Ethernet line. ET-7250A provides 6 sink-type digital output channels and 12 wet contact digital input channels, each of which is able to be used as a 32-bit counter. In addition, each digital input of ET-7250A accepts either dry contact or wet contact.

Specification

CPU Module
Watchdog Timer Yes, Module (0.8 second), Communication (Programmable)

 

EMS Protection
EFT (IEC 61000-4-4) ±4 kV for Power Line
ESD (IEC 61000-4-2) ±4 kV Contact for Each Terminal
±8 kV Air for Random Point

 

LED Indicators
Status 1 x Power, 2 x Ethernet, 16 x I/O

 

Software
Built-in Web Server Yes

 

Digital Input/Counter
Channels 12
Sink/Source (NPN/PNP) Dry: Source
Wet: Sink
Wet Contact, ON Voltage Level 1 VDC Max.
Wet Contact, OFF Voltage Level +3.5 VDC ~ +50 VDC Max.
Contact Wet Contact
Dry Contact, ON Voltage Level Close to GND
Dry Contact, OFF Voltage Level Open
Max. Counts 4,294,967,285 (32 bits)
Frequency 100 Hz
Min. Pulse Width 5 ms
Input Impedance 10 KΩ
Overvoltage Protection +60 VDC

 

Digital Output
Channels 6
Type Isolated Open Collector
Sink/Source (NPN/PNP) Sink
Load Voltage +5 VDC ~ +50 VDC
Max. Load Current 500 mA/channel
Overvoltage Protection 60 VDC
Overload Protection 1.3 A
Short-Circuit Protection Yes
Power on Value Yes, Programmable
Safe Value Yes, Programmable

 

Ethernet
Ports 2 x RJ-45, 10/100 Base-TX, Swtich Ports
Security ID, Password and IP Filter
Protocol Modbus/TCP, Modbus/UDP

 

Power
Reverse Polarity Protection Yes
Consumption 2.7 W
Powered from Terminal Block 12 ~ 48 VDC

 

Mechanical
Dimensions (mm) 76 mm x 120 mm x 38 mm (W x L x H)
Installation DIN-Rail or Wall mounting

 

Environmental
Operating Temperature -25 ~ +75°C
Storage Temperature -30 ~ +80°C
Humidity 10 ~ 90% RH, Non-condensing

Download

Data sheet

Documents

Ordering information

ET-7250A  CR  Ethernet I/O Module with 2-port Ethernet Switch, 12-ch DI and 6-ch DO (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: