Module RS-485 DCON 1 kênh đầu vào tương tự (Strain Gauge, 6 Wires) + 4 kênh DO + 1 kênh DI ICP DAS I-7016PD CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

1-ch 6-wire Strain Gauge Input Module with LED Display

THÔNG TIN SẢN PHẨM

Features

• Long-distance Strain Gauge Measurement
• High Resolution: 16-bit
• Excitation Voltage Output : 0 ~ +10 V
• 50 Hz Event Counter (Digital Input)
• High/Low Alarm (Digital Output)
• 3000 VDC Intra-module Isolation
• Dual Watchdog
• Wide Operating Temperature Range: -25 to +75°C

Introduction

The “P” version of the I-7016 module is another milestone in the development of the I-7016 series, and is a testament to excellence by the R&D team at ICP DAS. The I-7016P is specifically designed for long-distance strain gauge measurement, and provides 1 Digital Input channel as a 50 Hz event counter and 4 Digital Output channels that can act as high or low alarms. The I-7016P also features 3000 VDC intra-module isolation.

Specification

CPU Module
Watchdog Timer	Yes, Module (1.6 Seconds), Communication (Programmable)

Display
Type	5-Digit 7 Segment LED Display

Isolation
Intra-module Isolation	3000 VDC

EMS Protection
EFT (IEC 61000-4-4)	4 kV Contact for each Terminal 8 kV Air for Random Point
ESD (IEC 61000-4-2)	±4 kV for Power Line

LED Indicators
Status	1 x Power and Communication

Analog Input
Channels	1
Type	Strain Gauge
Sensor Type	Full-Bridge
Resolution	16-bit
Accuracy	±0.05% of FSR
Sampling Rate	10 Hz
Input Impedance	20 MΩ
Overvoltage Protection	±5 VDC
Long Distance Measurement	Yes

Digital Input/Counter
Channels	1
Type	Dry Contact
Sink/Source (NPN/PNP)	Source
ON Voltage Level	Close to GND
OFF Voltage Level	Open
Max. Counts	16-bit
Frequency	50 Hz
Input Impedance	3 kΩ
Overvoltage Protection	±30 VDC

Digital Output
Channels	4
Type	Open Collector
Sink/Source (NPN/PNP)	Sink
Load Voltage	+3.5 ~ +50 VDC
Max. Load Current	30 mA/Channel
Power on Value	Yes
Safe Value	Yes

Excitation Voltage Output
Channels	1
Range	0 ~ +10 V
Resolution	16-bit
Accuracy	±0.05%
Max. Load Current	40 mA
Power on Value	Yes

COM Ports
Ports	1 x RS-485
Baud Rate	1200 to 115200 bps
Data Format	N, 8, 1
Protocol	DCON

Power
Reverse Polarity Protection	Yes
Input Range	+10 ~ +30 VDC
Consumption	1.3 W

Mechanical
Dimensions (mm)	123 x 72 x 35 (W x L x H)
Installation	DIN-Rail

Environmental
Operating Temperature	-25 ~ +75 °C
Storage Temperature	-40 ~ +85 °C
Humidity	10 ~ 95% RH, Non-condensing

Download

Data sheet

Documents

Odering information

I-7016PD CR

1-ch 6-wire Strain Gauge Input Module with LED Display using DCON Protocol (Blue Cover) (RoHS)

Module RS-485 DCON 1 kênh đầu vào tương tự (Strain Gauge, 6 Wires) + 4 kênh DO + 1 kênh DI ICP DAS I-7016PD CR

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng