I-7565M-FD CR: Bộ chuyển đổi USB sang 2 cổng CAN/CAN FD Bus

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

I-7565M-FD CR USB to 2-port CAN/CAN FD Converter (Matel Case) (RoHS)

THÔNG TIN SẢN PHẨM

Features

Compatible with USB 2.0 (High Speed)
Compatible with the ISO 11898-2 standard
Compatible with CAN specification 2.0 A/B and FD
CAN FD support for ISO and Non-ISO (Bosch) standards switchable
CAN FD bit rates for data field from 100 kbps to 4000 kbps
CAN bit rates from 10 kbps to 1000 kbps
Support CAN Bus message filter configuration
Time stamp resolution 1ms.
Voltage supply via USB
Watchdog inside
Provide PWR, CAN Tx/Rx and CAN status indication LEDs
Built-in dip-switch to select 120 ohm terminal resister for CAN Bus
Support firmware update via USB
Provide utility tool for users module setting and CAN Bus communication testing conveniently
Provide API library for user program development

Introduction

I-7565M-FD is a USB to CAN/CAN FD (CAN with Flexible Data-Rate) converter with two CAN channels. It allows transmitting/receiving CAN/CAN FD frames and supports CAN2.0A/2.0B and CAN FD (ISO/Bosch) specifications and different baud rates for CAN/CAN FD frame. (10 kbps to 1000 kbps for CAN arbitration phase and 100 kbps to 4000 kbps for CAN FD data phase). When connecting I-7565M-FD to PC, PC will load the relevant device driver automatically (hot plug & play). Therefore, users can make data collection and processing of CAN Bus network easier and quicker by applying I-7565M-FD. The application fields can be CAN Bus monitoring, building automation, remote data acquisition, environment control and monitoring, laboratory equipment & research, factory automation, etc. The following is the application structure for the USB to CAN/CAN FD module. The PC can be the CAN host, monitor or HMI to access/control the CAN/CAN FD devices through the CAN network by the I-7565M-FD Converter. The module let users to communicate with CAN/CAN FD devices easily from PC with USB interface.

Moreover, we expand the functionalities of tM-7565 for some special application. In pair connection mode, tM-7565 can be used to communicate between two PC via USB. The application architecture may be as follows.

Application

• Control System
• Building Automation
• Factory Automation
• Monitor System
• Vehicle Automation

Specifications

Software
Library	C#.Net, VB.Net, VC++.Net

LED Indicators
Status	1 x Power 1 x Module status 4 x CAN status

USB
Specification	USB 2.0 High Speed (480Mbps)
Connector	1 x USB (Type B)
Driver	Built-in Windows 7/8.1/10

CAN
Transceiver	TI TCAN1042HG
Ports	2
Baud Rate	CAN bit rates: 10 k ~ 1 M bps, CAN FD bit rates for data field: 100 k ~ 4M bps
Isolation	3000 VDC for DC-to-DC, 2500 Vrms for photocoupler
Terminal Resistor	DIP switch for the 120 Ω terminal resistor
Specification	ISO 11898-2, CAN 2.0 A/B and FD
Filter	Yes
Receive Buffer	128 data frames
Data Flow	3000 fps for Tx/Rx (Total CAN ports)

Power
Input Range	USB power delivery
Consumption	1.5 W

Mechanical
Casing	Metal
Dimensions (mm)	111 x 102 x 27 (W x L x H)
Installation	Wall Mount

Environmental
Operating Temperature	-25 ~ +75 °C
Storage Temperature	-30 ~ +80 °C
Humidity	10 ~ 90% RH, Non-condensing

Download

Data sheet

Documents

Ordering Information

I-7565M-FD CR

USB to 2-port CAN/CAN FD Converter (Matel Case) (RoHS)

I-7565M-FD CR: Bộ chuyển đổi USB sang 2 cổng CAN/CAN FD Bus

Features

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng