I-8091 CR: Module điều khiển động cơ bước/Servo 2 trục (Stepping/Servo Motor)

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

I-8091 CR 2-axis Stepping/Servo Motor Control Module (Blue Cover) (RoHS) (Only suitable for I-8000 and ISaGRAF PAC)

THÔNG TIN SẢN PHẨM

Features

• 2-axis Independent, Simultaneous Stepping Motor Control/ Servo Motor Control (Pulse Input Type)
• Maximum Pulse Rate: 1 Mpps
• Maximum Step Counts: 232 - 1 Steps
• Command Type Interface
• 2-axis Linear, 2-axis Circular Interpolation
• Automatic Trapezoidal Acceleration/Deceleratio
• Output Pulse modes: CW/CCW or Pulse/Direction
• Output Polarity can be Programmable
• 3 Optical Isolated Dgital Inputs per Axis for Limit Switches
• Programmable Limit Switch Initial Condition as Normal Open (N.O.) or Normal Close (N.C.)

Introduction

I-8091 stepping motor control card is a micro-computer controlled, 2-axis pulse generation card. It includes a 2K bytes FIFO to receive motion command from host. A micro-computer for profile generation and protection, 2-axis DDA chip to execute DDA function when interpolation command is used, 2500 VDC optical isolation inserted for industrial application.

Specification

Isolation
Intra-module Isolation	2500 VDC

EMS Protection
ESD (IEC 61000-4-2)	± 4 kV Contact for Each Terminal

LED Indicators
Status	1 x Power and Communication 7 x I/O

Encoder Input
Type	1. CW/CCW 2. Pulse/Direction

Motor Output
No. of Axes	2-axis
Step Frequency	1 Mpps

Power
Consumption	3.9 W Max.

Mechanical
Dimensions (mm)	31 x 114 x 66 (W x L x H)

Environmental
Operating Temperature	-25 ~ +75 °C
Storage Temperature	-40 ~ +85 °C
Humidity	10 ~ 90% RH, Non-condensing

Download

Data sheet

Documents

Ordering information

I-8091 CR

2-axis Stepping/Servo Motor Control Module (Blue Cover) (RoHS)
(Only suitable for I-8000 and ISaGRAF PAC)

I-8091 CR: Module điều khiển động cơ bước/Servo 2 trục (Stepping/Servo Motor)

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng