Bộ chuyển đổi 2 cổng RS-232/422/485 sang Ethernet ICP DAS iDS-728i-T

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

iDS-728i-T CR Intelligent Device Server with 2 RS-232/422/485 and 1 Ethernet port (Isolated, Terminal Block, Plastic Case) (RoHS)

Gọi +84 904251826 để được trợ giúp

Bộ chuyển đổi 2 cổng RS-232/422/485 sang Ethernet ICP DAS iDS-728i-T

Features

• Incorporate Serial Devices in an Ethernet network
• Serial ESD protection
• 2 Serial Ports (RS-232/422/485)
• Built-in Hardware-selectable Pull High/Low resistors and Terminal resistors for RS-422/485 ports
• Provides Virtual COM (COM port redirection), TCP Server/Client (Max. 32 connections), UDP, Serial Tunnel (Pair connection), Modem Emulator, Modbus Gateway and RFC2217 application modes
• Supports SNMP V1, V2c, V3 and Trap protocols
• Supports RS-485 Data Direction Control with Self-Tuner Technology
• Web-based configuration and PC Utility
• Operating temperature range: -25 ~ +75°C

Introduction

The iDS product range is the 3rd generation of Device Servers from ICPDAS. It is designed for rugged, industrial-level applications, and provides high performance, high reliability and high capacity. The iDS product range provides a complete Ethernet service, as well as 1, 2 and 4-port RS-232/RS-422/RS-485 interfaces that allow any existing serial devices to be connected to an Ethernet network.

Powerful Data Transparent Solution: Zero Data Loss
The iDS product range is equipped with an ARM-based high-performance CPU and large capacity RAM in order to accomplish the goal of “Zero Data Loss” when attempting to transfer a critical data stream. If a failure occurs on the Ethernet connection, the serial data will be queued and will be resent once the Ethernet is reconnected. Each device port provides 32 TCP connections that can be used to share the same information across the network from a single serial device.

Industrial–grade Design
The iDS product range provides a wide range of built-in features designed for easy deployment of the device into existing operating environments.

1. Dual Power Supply: DC and PoE
2. DIN-Rail Mounting
3. Serial Port Surge Protection
4. Adjustable RS-485 Terminal Resistor and Pull High/Low Resistor
5. RS-485 Direction Control via the embedded ICPDAS Self-Tuner
6. Hardware/Software-selectable RS-232, RS-422 or RS-485 Interfaces
7. Hardware Reset button and LED Indicator
8. 64-bit Hardware Serial Number
 

Easy web-based Configuration
The built-in web server allows the iDS product to be accessed and configured using a standard web browser, such as Internet Explorer or Google Chrome. The configurations include parameters of serial ports, SNMP, the mode of Serial-To-Ethernet service. In addition, the onboard Flash memory provides the capacity for future software upgrades.

IT-friendly Management
All devices in the iDS product range support the SNMP protocol, which is a popular method within the IT industry for monitoring a device over the Ethernet. The iDS device can be configured to send SNMP-Trap alerts to the SNMP manager if user-defined errors or events are encountered. For example, alerts can be triggered by a warm/cold start events, or a password change, etc. An email alert and web-based event log page is also provided.

Perfect Harmony
Making the right decision leads to lazy days on the beach.

Specification

Software
OS Support Windows, Linux
Utility VxComm (Virtual COM) Utility for Windows
Driver VxComm (Virtual COM) Driver for Windows
Application Modes Virtual COM, TCP Server, TCP Client, UDP, Pair Connection, RFC2217, Terminal, Reverse Telnet, TCP Modem, Modbus Gateway

 

CPU Module
CPU 32-bit High Performance Processor
64-bit Hardware Serial Number Yes
Watchdog Timer Yes

 

EMS Protection
ESD (IEC 61000-4-2) Yes

 

LED Indicators
Status 1 x Power
1 x Run
1 x Ethernet

 

COM Ports
Ports 2 x 5-wire RS-232/422/485 (Isolated)
Baud Rate 921600 bps Max.
Bias Resistor Switch-selectable (1 kΩ for RS-422/485, Non-Resistor for RS-232)
Parity None, Even, Odd, Mark, Space
Data Bit 5, 6, 7, 8
Stop Bit 1, 1.5, 2
Flow Control RTS/CTS, XON/XOFF

 

Ethernet
Ports 1 x RJ-45, 10/100 Base-TX
PoE PoE (IEEE 802.3af, Class 1)
Virtual COM Windows: 32- and 64-bit Windows 7 SP1/10/2012/2016
Linux: Linux kernel 2.4.x, 2.6.x, 3.x
Protocol ICMP, IPv4, IPv6, TCP, UDP, DHCP, BOOTP, Telnet, SSH, FTP, SFTP, DNS, SNMP V1/V2c/V3, HTTP, SMTP, ARP
Configuration Web and eSearch Utility for Windows

 

Power
Reverse Polarity Protection Yes
Input Range +12 VDC ~ +48 VDC (Non-isolated)
Consumption 3.5 W
Powered from PoE Yes

 

Mechanical
Casing Plastic
Dimensions (mm) 78 x 114 x 42 (W x L x H)
Installation DIN-Rail

 

Environmental
Operating Temperature -25 °C ~ +75 °C
Storage Temperature -40 °C ~ +80 °C
Humidity 5 ~ 90% RH, Non-condensing

Download

Datasheet

Document

Ordering information

iDS-728i-T     CR  Intelligent Device Server with 2 RS-232/422/485 and 1 Ethernet port (Isolated, Terminal Block, Plastic Case) (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: