Module RS-485 Modbus điều khiển đèn 1 kênh đầu vào AC + 3 kênh đầu ra AC Relay ICP DAS LC-103H CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

1-channel AC Digital Input and 3-channel Relay Output Lighting Control Module with High Power Relay Output

THÔNG TIN SẢN PHẨM

LC-103H CR: Module RS-485 Modbus điều khiển đèn chiếu sáng 1 kênh đầu vào AC + 3 kênh đầu ra AC Relay

Features

Provide High Power Relay Output to turn ON/OFF the Lighting
Support Lighting Module (Max.):
Incandescent Lamp: 40 W/ 220 VAC * 8 Sets
LED(Electronic ballast): 40 W/ 220 VAC * 10 Sets
Isolated AC Digital Input
Made from fire retardant materials (UL94-V0 Level)
5000 VDC Intra-Module Isolation
±2 kV Surge, ±4 kV ESD and EFT Protection
Supports Modbus RTU and DCON Protocols
Low power consumption
DIN-Rail mounting

Introduction

The LC-103H is an easy-to-use lighting control module that requires no specialist skills to install and operate, and no software is needed in order to control the DO channels.

The LC-103H provides 1 channel for digital input (photo couple isolation) and 3 channels for relay output. All output channels are form A type relays, while the input channel is based on a sink-type using a wire connection. The input channel can directly control a 3-channel relay ON and OFF sequence without requiring a remote host controller. 4 kV ESD protection and 5000 Vrms intra-module isolation are also provided.

When required, communication with the LC-103H is programmable based on the DCON & Modbus RTU protocol, and an added benefit is that different addresses can be set for DCON & Modbus RTU communication via hardware configuration.

Specifications

Software
Function	Local and Remote Direct Control Relay ON/OFF and Remote Status Monitoring

EMS Protection
EFT (IEC 61000-4-4)	±2 kV for Power
ESD (IEC 61000-4-2)	±2 kV Contact for Each Terminal ±4 kV Air for Random Point
Surge (IEC 61000-4-5)	±2 kV for Power

LED Indicators
Status	1 LED as Power Indicator

Digital Input
Channels	1
Type	90 ~ 240 VAC
Wet Contact, ON Voltage Level	65 VAC
Wet Contact, OFF Voltage Level	56 VAC
Isolation	5000 Vrms
Input Impedance	68 KΩ, 1 W

Relay Output
Channels	3
Type	Power Relay, Form A (SPST N.O.)
Contact Rating	16 A @ 250 VAC or 16 A @ 30 VDC
Operate Time	10 ms Max.
Release Time	5 ms Max.
Electrical Endurance	120,000 ops.
Mechanical Endurance	5,000,000 ops.
Application Specification	(1).Incandescent Lamp: 40W/ 220VAC * 8 Sets (2).LED(Electronic ballast): 40W/ 220VAC *10 Sets

COM Ports
Ports	1 x RS-485
Baud Rate	9600 bps
Data Format	(N, 8, 1)
Protocol	Modbus RTU/DCON

Power
Input Range	10 ~ 30 VDC
Consumption	0.5 W Max.

Mechanical
Dimensions (mm)	72 x 100 x 59 (W x L x H)
Installation	DIN-Rail

Environmental
Operating Temperature	-25 ~ +75°C
Storage Temperature	-30 ~ +75°C
Humidity	10 ~ 95% RH, Non-condensing

Download

Data sheet

Documents

Ordering infromation

LC-103H CR

1-channel AC Digital Input and 3-channel Relay Output Lighting Control Module with High Power Relay Output (RoHS)

Module RS-485 Modbus điều khiển đèn 1 kênh đầu vào AC + 3 kênh đầu ra AC Relay ICP DAS LC-103H CR

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng