M-7064: Module 8 kênh đầu ra Relay kết nối RS-485 DCON & Modbus RTU ICP DAS

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

M-7046-G CR 15-channel Isolated Digital Input Module using the DCON or Modbus Protocol (Gray Cover) (RoHS)

M-7046D-G CR M-7046 with LED Display (Gray Cover) (RoHS)

Gọi +84 904251826 để được trợ giúp

M-7064: Module 8 kênh đầu ra Relay kết nối RS-485 DCON & Modbus RTU ICP DAS

Features

  • 8 Form A Signal Output Channels
  • Dual Watchdog
  • 8 kV ESD Protection
  • ±4 kV EFT Protection
  • ±3 kV Surge Protection
  • Configurable Power-on Value Settings
  • Configurable Safe Value Settings
  • Wide Operating Temperature Range: -25 to +75°C

Introduction

The M-7064 module provides 8 Form A signal relay output channels. The M-7064D module include 8 LED indicators that can be used to monitor the status of the relay output, and options are provided that allow power-on and safe Relay Output values to be configured. 8 kV ESD, 4 kV EFT and 3 kV surge protection are also provided to enhance noise protection capabilities in industrial environments, making the M-7064(D) an ideal solution for small signal switching applications.

Application

  • Building Automation
  • Factory Automation
  • Machine Automation
  • Remote Maintenance
  • Remote Diagnosis
  • Testing Equipment

I/O Specification

Models M-7064 M-7064D
Relay Output
Channels 8 x Form A
Relay Type Signal Relay
Form A Contact Rating 2 A @ 30 VDC
0.24 A @ 220 VDC
0.25 A @ 250 VAC
Min. Contact Load 10 mA @ 20 mV
Contact Material Silver Nickel, Gold-covered
Operate Time 3 ms (typical)
Release Time 4 ms (typical)
Mechanical Endurance 108 ops
Electrical Endurance 2 x 105 ops
Surge Strength 2000 VDC
Power-on Value Yes
Safe Value Yes

System Specification

Models M-7064 M-7064D
Communication
Interface RS-485
RS-485 Bias Resistor No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785.)
Format (N, 8, 1), (N, 8, 2), (E, 8, 1), (O, 8, 1)
Baud Rate 1200 to 115200 bps
Protocol Modbus RTU, DCON
Dual Watchdog Yes, Module (1.6 Seconds), Communication (Programmable)
LED Indicator/Display
System LED Indicator Yes, 1 as Power/Communication Indicator
I/O LED Indicator - Yes, 8 LEDs as Relay Output Indicators
7-Segment LED Display -
Isolation
Intra-Module Isolation, Field-to-Logic 2000 VDC
EMS Protection
ESD (IEC 61000-4-2) ±8 kV Contact for each Terminal
±16 kV Air for Random Point
EFT (IEC 61000-4-4) ±4 kV for Power Line
Surge (IEC 61000-4-5) ±3 kV for Power
Power
Reverse Polarity Protection Yes
Input Range +10 ~ +30 VDC
Consumption 1.5 W (Max.) 1.6 W (Max.)
Mechanical
Dimensions (L x W x H) 123 mm x 72 mm x 35 mm
Installation DIN-Rail or Wall Mounting
Environment
Operating Temperature -25 to +75°C
Storage Temperature -40 to +85°C
Humidity 10 to 95% RH, Non-condensing

Download

Manual

Data sheet

Software

Addressing Map

FAQ

Certification

Odering information

M-7064-G CR 8-channel Form A Signal Relay Output Module (Gray Cover) (RoHS)
M-7064D-G CR M-7064 with LED Display (Gray Cover) (RoHS)

 

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: