Module 7 kênh đầu ra Photo-Mos Relay kết nối RS-485 DCON ICP DAS M-7066P

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

M-7066P CR 7-channel PhotoMOS Relay Output Module with DCON and Modbus Protocols (Gray Cover) (RoHS)

THÔNG TIN SẢN PHẨM

Features

I-7066(D)
- PhotoMOS Relay:0.13 A @ 350 V (AC peck or DC)
M-7066P(D)
- PhotoMOS Relay:1 A @ 80 V (AC peck or DC)
7 PhotoMOS Relay Outputs
4 kV ESD Protection
No Arcing, No Bounce, and No Switching Noise
Photocouple Isolation
Built-in Dual Watchdog
Configurable Power-on Value Settings
Configurable Safe Value Settings
Wide Operating Temperature Range: -25 ~ +75°C

Introduction

Both the I-7066 and the M-7066P feature seven Form A PhotoMOS relay output channels. In comparison to electromechanical relays, the PhotoMOS relays provide a faster response time, greater electrical endurance, higher vibration and shock resistance. There are also no arcing, no bounce, and no switching noise for the PhotoMOS relay. There are options for configuring power-on and safe digital output values, and both the I-7066D and the M-7066PD each include seven LED indicators that are used to display channel status as well as providing 4 kV ESD protection.

Application

Building Automation
Factory Automation
Machine Automation
Remote Maintenance
Remote Diagnosis
Testing Equipment

I/O Specification

Models		I-7066	I-7066D	M-7066P	M-7066PD
Relay Output
Channels		7
Relay Type		PhotoMOS Relay (Form A)
Form A PhotoMOS	Operating Load Voltage Range	350 V (AC peck or DC)		80 V (AC peck or DC)
	Continuous Load Current	0.13 A		1 A
	Peak Load Current	0.4 A		3 A
	Output Off State Leakage Current	1 uA
	Operate Time	2 ms (Max.)		5 ms (Max.)
	Release Time	1 ms (Max.)		0.2 ms (Max.)
	Electrical Endurance	Long Life, And No Arcing, No Bounce, And No Switching Noise
Power-on Value		Yes, Programmable
Safe Value		Yes, Programmable

System Specification

Models	I-7066	I-7066D	M-7066P	M-7066PD
Communication
Interface	RS-485
Format	(N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1)
Baud Rate	1200 ~ 115200 bps
Protocol	DCON		DCON, Modbus RTU
Dual Watchdog	Yes, Module (1.6 Seconds), Communication (Programmable)
LED Indicator/Display
System LED Indicator	Yes, 1 LED as Power/Communication Indicator
I/O LED Indicator	-	Yes, 7 LEDs as Relay Output Indicators	-	Yes, 7 LEDs as Relay Output Indicators
7-Segment LED Display	-
Isolation
Intra-Module Isolation, Field-to-Logic	5000 VDC		2000 VDC
EMS Protection
ESD (IEC 61000-4-2)	±4 kV Contact for each Terminal
	±8 kV Air for Random Line
EFT (IEC 61000-4-4)	±4 kV for 8 Relay and Power Line
	±2 kV for RS-485 Port Line
Surge (IEC 61000-4-5)	-
Power
Reverse Polarity Protection	Yes
Input Voltage Range	10 ~ 30 VDC
Consumption	0.4 W	0.8 W	0.5 W	0.9 W
Mechanical
Dimensions (W x L x H)	72 mm x 123 mm x 35 mm
Installation	DIN-Rail or Wall Mounting
Environment
Operating Temperature	-25 ~ +75°C
Storage Temperature	-40 ~ +85 °C
Humidity	10 ~ 95% RH, Non-condensing

Download

Odering information

I-7066 CR	7-channel Photo-Mos Relay Output Module with DCON Protocol (Blue Cover) (RoHS)
I-7066D CR	I-7066 with LED Display (Blue Cover) (RoHS)
M-7066P CR	7-channel PhotoMOS Relay Output Module with DCON and Modbus Protocols (Gray Cover) (RoHS)
M-7066PD CR	M-7066P with LED Display (Gray Cover) (RoHS)

Module 7 kênh đầu ra Photo-Mos Relay kết nối RS-485 DCON ICP DAS M-7066P

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng