Module 8 kênh đầu ra tương tự giao diện HART ICP DAS F-8028CH

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

Analog Output Module, 8 channels, 4 ~ 20 mA, for DCS systems, supports operating temperatures from -25°C ~ +75°C

THÔNG TIN SẢN PHẨM

Features

The F-8028CH is a 16-bit, 8-channel analog output module. It provides digital to analog converter controlled by the system module to convert the digital data into output signals. Users can specify the start up and safety value through configuration software. Moreover, this module has ±0.05% accuracy for highly accurate application. In addition to current output, F-8028CH is also built-in HART master interface to remotely maintain devices via HART. Besides, the F-8028CH provides 3000VDC optical isolation between channels and backplane bus. If any high voltage or current damages these channels, this module won’t affect other component in iDCS-8000 system.

8 current output channels
HART compliant
Built-in HART master interface
Overrange output
Open wire detection
RoHS compliance
3000 VDC isolation from output to backplane
3000 VDC isolation from output to frame ground
Redundancy
Fast redundant switching time (<1 ms)

Applications

Building Automation
Factory Automation
Machine Automation
Remote Maintenance
Remote Diagnosis
Testing Equipment

Specifications

Feature
HART interface	Yes, supports HART master
Redundant	Yes (Switching time < 1 ms)
Termination board break off detection	Yes
Open Wire Detection	Yes
Power-On Value	Yes
Safety Value	Yes
Accuracy	1 RUN, 1 ACT, 1 DUX
Analog Output
Number of channels	8
Type	4 ~ 20 mA, currnet sourcing
Maximum Allowable Output Range	±25% (0 ~ 24 mA)
Resolution	16 bit
Output Response Time	<200 μS
Accuracy	±0.05% FSR
Zero Drift	±0.2 μV/℃
Span Drift	±25 ppm/℃
Output Capacity	0 ~ 750 Ω
Data Range	-2500 ~ 12500
Isolation	3000 VDC
Certification
EMC	EN61000-6-2, EN61000-6-4, IEC/EN 61000-4-2, IEC/EN 61000-4-4
General
Termination board	DN-AIO-M
Maximum power consumption	0.5 W + 10W1
Operating temperature	-25°C ~ +75°C
Humidity	5 ~ 95 % RH, Non-condensing
Weight	300 g
Dimensions (W x L x H)	30 mm x 85 mm x 115 mm

Reference & Support

Module 8 kênh đầu ra tương tự giao diện HART ICP DAS F-8028CH

Features

Applications

Specifications

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng