Module điều khiển đèn 1 đầu vào AC 1 đầu ra số truyền thông RS-485 ICPDAS LC-101/DIN

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

Cost-effective for lighting control
Power Relay Output
Isolated AC Digital Input
Tiny form-factor
Low power consumption

THÔNG TIN SẢN PHẨM

LC-101
1-channel AC Digital Input and 1-channel Relay Output Lighting Control Module

~ NEW ~

Model: LC-101	Model: LC-101/DIN

Cost-effective for lighting control
Power Relay Output
Isolated AC Digital Input
Tiny form-factor
Low power consumption

The LC-101 is an easy-to-use lighting control module that requires no specialist skills to install and operate, and no software is needed in order to control the DO channels.
The LC-101 provides 1 channel for digital input (photo couple isolation) and 1 channel for relay output. The output channel is form C type relay, while the input channel is based on a sink-type using a wire connection. The input channel can directly control the relay ON and OFF sequence without requiring a remote host controller. 4 kV ESD protection and 5000 Vrms intra-module isolation are also provided.

When required, communication with the LC-101 is programmable based on the Modbus RTU protocol, and an added benefit is that different addresses can be set for Modbus RTU communication via hardware configuration.

Digital Input
Input Channels	1
Type	90 ~ 240 VAC
On Voltage Level	85 VAC
Off Voltage Level	60 VAC
Input Impedance	68 KΩ, 1 W
Isolation	5000 Vrms
Function	Local and Remote Direct Control Relay ON/OFF and Remote Status Monitoring
Relay Output
Output Channels	1
Type	Power Relay, Form C
Operating Voltage	250 VAC or 30 VDC
Max. Load Current	NO: 10 A, NC: 6 A
Operating Time	15 ms Max.
Release Time	5 ms Max.
Electrical Life (Resistive load)	100,000 ops
Mechanical Life	20,000,000 ops at no load (300 ops/minute)
Power-on Value	No
Safe Value	No

Communication
Interface	RS-485
Format	N, 8, 1
Baud Rate	1200 ~ 115200 bps
Protocol	Modbus RTU/DCON
Node Addresses	Hardware Configuration: 32 ~ 63 Software Configuration: 0~255 for DCON and 1~247 for Modbus RTU standard)
Connector	RJ-11(6P4C or 6P6C)
LED Display
Power	1 LED as Power Indicator
EMS Protection
ESD (IEC 61000-4-2)	±2 kV Contact for Each Terminal
ESD (IEC 61000-4-2)	±4 kV Air for Random Point
EFT (IEC 61000-4-4)	±2 kV for Power
Power Requirements
Input Voltage Range	10 ~ 30 VDC
Consumption	0.5 W Max.
Connector	RJ-11
Mechanical
Dimensions (W x L x H)	52 mm x 98 mm x 27 mm
Installation	Screw Mounting
Environment
Operating Temperature	-25°C ~ +75°C
Storage Temperature	-30°C ~ +75°C
Humidity	10 ~ 95% RH, Non-condensing

LC-101 CR	1-channel AC Digital Input and 1-channel Relay Output Lighting Control Module (screw mount) (RoHS)
LC-101/DIN CR	1-channel AC Digital Input and 1-channel Relay Output Lighting Control Module (DIN Rail mount) (RoHS)

Module điều khiển đèn 1 đầu vào AC 1 đầu ra số truyền thông RS-485 ICPDAS LC-101/DIN

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng