NSM-200G-SFP CR: Bộ chuyển đổi quang điện công nghiệp 1 cổng Gigabit Ethernet + 1 cổng Gigabit SFP

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

NSM-200G-SFP CR Industrial 1000 Base-T to 1000 Base-X Converter, SFP slot (RoHS)

Gọi +84 904251826 để được trợ giúp

NSM-200G-SFP CR: Bộ chuyển đổi quang điện công nghiệp 1 cổng Gigabit Ethernet + 1 cổng Gigabit SFP

Features

• Provides 1 x 1000 Mbps fiber port with SFP Slot for 1000 Base-LX device
• Supports wide operating temperatures from -30 °C ~ +75 °C
• Transparent to jumbo packets up to 10 KB
• Provides Link Fault Pass-through (LFP)
• Supports redundant +12 VDC ~ +48 VDC power input

Introduction

ICP DAS's line of feature rich 10/100/1000 Fiber Media Converters transparently connects copper to multimode or single mode fiber. Our 10/100/1000 Ethernet to Fiber Converters provide an economical path to extend the distance of an existing network, the line of non-fiber based equipment, or the distance between two devices. The pluggable fiber optics port allows for flexible network configurations using SFP transceivers supplied by ICP DAS or other manufacturers of MSA (Multi-source Agreement) compliant SFPs. Gigabit Media Converters are also available with support for LFP (Link Fault Pass-through) feature.

Specification

LED Indicators
Status PWR1, PWR2, P-Fail, Link/Act, 100M, 1000M

 

Ethernet
Ports 1 x RJ-45, 10/100/1000Base-T(X)
Standards IEEE 802.3 for 10Base-T; IEEE 802.3u for 100Base-TX; IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow Control
Energy Efficient Ethernet (EEE) as per 802.3az; this provides power savings during idle network
activity
Processing Type Store & forward, wire speed switching
MAC Addresses 8K
Memory Bandwidth 10 Gbps
Frame Buffer Memory 1 Mbit
Jumbo Frames 10K
DIP Switch 1 x SFP Speed, LFP Enable

 

Fiber
Ports 1 x 100/1000 Mbps SFP Fiber Module slots

 

Power
Reverse Polarity Protection Yes
Input Range +12 VDC ~ +48 VDC Redundant dual Input(Non-isolated)
Redundant Power Inputs Yes
Consumption 0.1 A @ 24 VDC
Alarm Contact Yes,Relay 1 A @ 30 VDC

 

Mechanical
Casing Matel
Dimensions (mm) 34 x 111 x 121 (W x L x H)
Installation DIN-Rail Mounting (optional wall mounting kits)

 

Environmental
Operating Temperature -30 °C ~ +75 °C
Storage Temperature -40 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing

Download

Data Sheet

Documents

Ordering information

NSM-200G-SFP     CR  Industrial 1000 Base-T to 1000 Base-X Converter, SFP slot (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: