NSM-200LX CR: Bộ chuyển đổi quang điện công nghiệp 1 cổng Ethernet + 1 cổng quang (2 sợi quang, Single-mode, 10KM, SC)

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

NSM-200LX CR Industrial 1000 Base-T to 1000 Base-LX Fiber Converter, Single-mode 1310 nm, 10 km, SC connector (RoHS)

Gọi +84 904251826 để được trợ giúp

NSM-200LX CR: Bộ chuyển đổi quang điện công nghiệp 1 cổng Ethernet + 1 cổng quang (2 sợi quang, Single-mode, 10KM, SC)

Features

• Provides 1 x 1000 Mbps fiber port with SC type connector for 1000 Base-LX device
• Supports wide operating temperatures from -30 °C ~ +75 °C
• Transparent to jumbo packets up to 10 KB
• Provides Link Fault Pass-through (LFP)
• Supports redundant +12 VDC ~ +48 VDC power input

Introduction

ICP DAS's line of feature rich 10/100/1000 Fiber Media Converters transparently connects copper to multimode or single mode fiber. Our 10/100/1000 Ethernet to Fiber Converters provide an economical path to extend the distance of an existing network, the line of non-fiber based equipment, or the distance between two devices. Gigabit Media Converters are also available with support for LFP (Link Fault Pass-through) feature.

Specification

LED Indicators
Status PWR1, PWR2, P-Fail, Link/Act, 100M, 1000M

 

Ethernet
Ports 1 x RJ-45, 10/100/1000Base-T(X)
Standards IEEE 802.3 for 10Base-T; IEEE 802.3u for 100Base-TX; IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow Control
Energy Efficient Ethernet (EEE) as per 802.3az; this provides power savings during idle network
activity
Processing Type Store & forward, wire speed switching
MAC Addresses 8K
Memory Bandwidth 10 Gbps
Frame Buffer Memory 1 Mbit
Jumbo Frames 10K
DIP Switch 1 x LFP Enable

 

Fiber
Ports 1 x 1000Base-FX, SC connector
Mode Single-Mode
Fiber Cable 10/125 μm
Distance 10 km
Wavelength 1310 nm
TX Output -9.4 dBm Min.
-3 dBm Max.
RX Sensitivity -20 dBm
RX Overload -3 dBm

 

Power
Reverse Polarity Protection Yes
Input Range +12 VDC ~ +48 VDC Redundant dual Input(Non-isolated)
Redundant Power Inputs Yes
Consumption 0.1 A @ 24 VDC
Alarm Contact Yes,Relay 1 A @ 30 VDC

 

Mechanical
Casing Matel
Dimensions (mm) 34 x 111 x 121 (W x L x H)
Installation DIN-Rail Mounting (optional wall mounting kits)

 

Environmental
Operating Temperature -30 °C ~ +75 °C
Storage Temperature -40 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing

Download

Data Sheet

Documents

Ordering information

NSM-200LX     CR  Industrial 1000 Base-T to 1000 Base-LX Fiber Converter, Single-mode 1310 nm, 10 km, SC connector (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: