Switch công nghiệp 4 cổng PoE Ethernet + 1 cổng Quang (Dual Fiber, Multi Mode, SC, 2KM) ICP DAS NSM-205PFC-24V CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

4-port 10/100 Mbps PoE (PSE) with 1 fiber port (Multi mode, SC connector) and +24 VDC Input

Gọi +84 904251826 để được trợ giúp

Switch công nghiệp 4 cổng PoE Ethernet + 1 cổng Quang (Dual Fiber, Multi Mode, SC, 2KM) ICP DAS NSM-205PFC-24V CR

Feature

• Provides 1 x 100-FX fiber port plus 4 x Ethernet ports
• Each port supports both 10/100 Mbps speed auto negotiation
• Store-and-forward architecture
• Full duplex IEEE 802.3x and half duplex backpressure flow control
• 4 PoE ports with Power Sourcing Equipment (PSE) operation
• Automatic MDI/MDI-X crossover for plug-and-play
• Auto-detection of PD (powered devices) and automatic power management
• Over-temperature, over-current and over/under-voltage detection
• Supports operating temperatures from -30 ~ +75 °C
• Multi-mode, SC Connector Fiber supports
• DIN-Rail Mounting

Introduction

The NSM-205PFC-24V is a 4-port unmanaged PoE (PSE) with 1 fiber port switch; it supports 4 PoE ports which are classified as power source equipments (PSE). The NSM-205PFC-24V makes centralized power supply come true and provides up to 15.4 watts of power per PSE port. Using fiber optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and high-distance (up to 2 km) transmissions. The NSM-205PFC-24V is designed with 24 VDC to 48 VDC boost for PoE application where 48 VDC power supply is not available.

Application

Specifications

EMS Protection
ESD (IEC 61000-4-2) ± 4 kV Contact
LED Indicators
Status Power, Link/Act, Power Device is detected
Ethernet
Ports 4 x RJ-45, 10/100Base-TX
Standards IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet)
Processing Type Store & forward; wire speed switching
MAC Table 1024
Memory Bandwidth 3.2 Gbps
Frame Buffer Memory 512 Kbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Isolation 1500 Vrms 1 minute
PoE Technology
PoE Compliance 100% IEEE 802.3af compliant
PoE Power Up to 15.4 watts per channel
PoE Operation Automatic detection and power management
PoE Pin Assignments V+ (Pin 1,2), V- (Pin 3,6)
PoE Disconnect Mode DC disconnect
Fiber
Ports 1 x 100 Base-FX, SC connector
Mode Multi-Mode
Fiber Cable 50/125, 62.5/125 or 100/140 μm
Distance 2 km, (62.5/125 μm recommended) for full duplex
Wavelength 1300 or 1310nm
TX Output -20 dBm Min.
-14 dBm Max.
RX Sensitivity -32 dBm
RX Overload -8 dBm
Budget 12 dBm
Power
Reverse Polarity Protection Yes
Input Range +18 ~ +32 VDC
Consumption 0.24 A @ 24 VDC without PD loading;
3.2 A @ 24 VDC with PD full loading;
4.6 A @ 18 VDC with PD full loading
Mechanical
Casing Metal
Dimensions (mm) 25 x 168 x 133 (W x L x H)
Installation DIN-Rail Mounting
Ingress Protection Rating IP30
Environment
Operating Temperature -30 °C ~ +75 °C
Storage Temperature -40 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing

Download

Datasheet

Documents

Ordering Information

NSM-205PFC-24V     CR  Multi-mode, SC Connector, 4-port 10/100 Mbps PoE (PSE) with 1 Fiber port and 24 VDC Input Switch; metal case (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: