-
-
-
Tổng tiền thanh toán:
-
Sản phẩm đã được thêm vào giỏ hàng
Số lượng:
Tổng tiền:
μPAC-7186EXD-CAN-G CR Programmable Automation controller with two series communication port (RS-232/RS-485), one CAN port, one Ethernet port, 7-segment Display, 4 programable LEDs, 512 KB flash ,512 KB SRAM, developing tool kit, Minios7. (RoHS)
Bộ lập trình điều khiển Ethernet 2 cổng RS-232/485 +1 cổng CAN ICP DAS μPAC-7186EXD-CAN
Embedded Internet” and “Embedded Ethernet” are hot topics today. Nowadays the Ethernet protocol becomes the de-facto standard for local area network. Via Internet, connectivity is occurring everywhere, from home appliances to vending machines to testing equipment to UPS…etc. Using Ethernet for network in industrial area is appealing because the required cabling is already installed. The μPAC-7186EXD-CAN PACs (programmable Automation controller) are powered by 80186-80 processor with 512K bytes of static RAM, and 512K bytes of Flash memory. All of them provide several communication interfaces to adapt to various applications, such as CAN port, RS-232 port, RS-485 port and Ethernet interface. Uses can program their application program flexibly with C/C++ language because of the built-in MiniOS7 operation system. Besides, the μPAC-7186EXD-CAN series PACs have different I/O types for users to match their requirement. For μPAC-7186EXD-CAN , there is no I/O channel. It is useful for transfer the command from differential communication interface. Therefore, the μPAC-7186EXD-CAN series PACs are economic and convenient solution for diversification CAN application.
Applications
TCP/IP Library
The software library provides TCP/IP protocols & web server. Support the following protocols.
TCP, Transmission Control Protocol:
Transport layer with connections, flow control and error correction
UDP, User Datagram Protocol:
Simple connectionless transport layer
IP, Internet Protocol:
The network layer
ICMP, Internet Control Message Protocol:
Part of IP for practical purposes
ARP, Address Resolution Protocol:
Retrieves a host’s network controller’s hardware address, given the host’s Internet address
Reverse Address Resolution Protocol:
Retrieves a host’s Internet address, given the host’s network controller’s
Features
1000 VDC voltage protection on CAN side
Compatible with CAN specification 2.0 parts A and B
Programmable transfer rate up to 1 Mbps
Jumper select 120Ω terminator resistor for CAN channel
Supports a variety of TCP/IP features, including TCP, UDP, IP, ICMP, ARP
10/100BASE-T Ethernet Controller
Upgradable OS image
Remote Configuration
64-bit hardware unique serial number inside
COM driver support interrupt & 1KB QUEUE Input & Output buffer
COM port: COM1, COM2
Built-in RTC, NVRAM, EEPROM
Built-in self-tuner ASIC controller on RS-485 port
7-segment LED display
Built-in ICP DAS's MiniOS7
Program download port: COM1 or Ethernet Port (Available soon)
Hardware Specifications
Hardware |
|
CPU |
80186, 80 MHz or compatible |
SRAM |
512 KB |
Flash |
512 KB; Erase unit is one sector (64 KB); 100,000 erase/write cycles |
EEPROM |
16 KB; Data retention: 40 years; 1,000,000 erase/write cycles |
NVRAM |
31 bytes (battery backup, data valid for up to 10 years) |
RTC (Real Time Clock) |
Yes |
CAN Interface |
|
Controller |
NXP SJA1000T with 16 MHz clock |
Transceiver |
NXP 82C250/NXP TJA1042 |
Channel number |
1 |
Connector |
5-pin screwed terminal block (CAN_L, CAN_H, N/A for others) |
Baud Rate (bps) |
10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 M (allow user-defined baud rate) |
Isolation |
1000 VDC for DC-to-DC, 2500 Vrms for photo-couple |
Terminator Resistor |
Jumper for 120 Ω terminator resistor |
Specification |
ISO-11898-2, CAN 2.0A and CAN 2.0B |
UART Interface |
|
COM 1 |
RS-232 |
COM 1 Connector |
5-pin screwed terminal block (TxD, RxD, RTS, CTS, GND) |
COM 2 |
RS-485 (Self-turner inside) |
COM 2 Connector |
2-pin screwed terminal block (DATA+, DATA-) |
Baud Rate (bps) |
110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 |
Ethernet Interface |
|
Controller |
10/100Base-TX Ethernet Controller (Auto-negotiating, Auto_MDIX) |
Power |
|
Power supply |
Unregulated +10 ~ +30 VDC |
Protection |
Power reverse polarity protection, Over-voltage brown-out protection |
Power Consumption |
3 W |
Mechanism |
|
Dimensions |
72mm x 122mm x 33mm (W x L x H) |
Environment |
|
Operating Temp. |
-25 ~ 75 ℃ |
Storage Temp. |
-30 ~ 80 ℃ |
Humidity |
10 ~ 90% RH, non-condensing |
Download
Odering information
μPAC-7186EXD-CAN-G |
Programmable Automation controller with two series communication port (RS-232/RS-485), one CAN port, one Ethernet port, 7-segment Display, 4 programable LEDs, 512 KB flash ,512 KB SRAM, developing tool kit, Minios7. |
μPAC-7186EXD-CAN-G CR |
Programmable Automation controller with two series communication port (RS-232/RS-485), one CAN port, one Ethernet port, 7-segment Display, 4 programable LEDs, 512 KB flash ,512 KB SRAM, developing tool kit, Minios7. (RoHS) |
Số lượng:
Tổng tiền: