-
-
-
Tổng tiền thanh toán:
-
Sản phẩm đã được thêm vào giỏ hàng
Số lượng:
Tổng tiền:
μPAC-7186EXD-SM CR Palm-size μPAC(80MHz CPU,10/100 Ethernet,640K SRAM,512K Flash ,RS-232*1,RS-485*1, RoHS) with 7-segment display
Bộ lập trình điều khiển truyền thông Ethernet ICP DAS μPAC-7186EXD-SM
Introduction
The μPAC-7186EX-SM is a palm-size programmable automation controller that with Ethernet, RS-232, RS-485 communication. ICPDAS provide easy-to-use software development tool kits (Xserver, VxComm, Modbus libraries). Users can use them to easily integrate serial devices to have Ethernet/Internet communication ability and through the standard Modbus protocol to communicate with SCADA software (Indusoft, ISaGARF, DasyLab, Trace Mode, Citect, iFix, etc.).
For the hardware, it also supports an I/O expansion bus. The I/O expansion bus can be used to implement various I/O functions such as D/I, D/O, A/D, D/A, Timer/Counter, UART, flash memory, battery backup SRAM, ASIC key & other I/O functions. Nearly all kinds of I/O functions can be implemented by this bus but the bus can support only one board. There are more than 50 boards available for μPAC-7186EX-SM, you can choose one of them to expand hardware features.
Features
Support for Virtual COM technology
Using the VxComm technology, PC can create virtual COM ports to map the RS-232, RS-485 of the μPAC-7186EX-SM. The software running on the PC can operate the virtual COM ports like a standard COM port to access the serial devices connect to the μPAC-7186EX-SM. That is to say, the original software developed for the serial devices can access the serial devices via the Ethernet/Internet without any modification.
Each PC can control up to 256 COM ports (including real COM ports). Using the I/O expansion board, each μPAC-7186EX-SM can have up to 8 COM ports.
Support Modbus Protocol
Using the Modbus firmware, μPAC-7186EX-SM offers following Modbus features:
Modbus/TCP/RTU/ASCII slave
Modbus/TCP/RTU/ASCII master
Gateway for Modbus/TCP to Modbus/RTU
Specification
CPU |
|
CPU |
80186 or compatible (16-bit and 80 MHz) |
SRAM |
640 KB |
Flash |
512 KB; Erase unit is one sector (64K bytes); 100,000 erase/write cycles. |
EEPROM |
16 KB |
NVRAM |
31 Bytes (battery backup, data valid up to 10 years) |
RTC (Real Time Clock) |
RTC Provide seconds, minutes, hours, date of week/month; month and year, valid from 1980 to 2079 |
64-bit Hardware Serial Number |
Yes |
Built-in Watchdog Timer |
Yes (0.8 second) |
Communication Interface |
|
COM1 |
RS-232 (TxD, RxD, CTS, RTS and GND); Non-isolated |
COM2 |
RS-485 (D2+, D2-; self-tuner ASIC inside); Non-isolated |
Ethernet Port |
10/100Base-TX Ethernet Controller |
COM Port Formats |
|
Data bit |
7, 8 |
Parity |
Even, Odd, None |
Stop bit |
1 |
LED Display |
|
5-Digit 7 Segment LED Display |
Yes (for μPAC-7186EXD-SM only) |
System LED Indicator |
Yes |
Hardware Expansion |
|
I/O expansion bus |
Yes |
User defined I/O pins |
14 pins |
Dimensions |
|
W x H x D |
72 mm x 123 mm x 35 mm |
Operating Environment |
|
Operating Temperature |
-25°C ~ +75°C |
Storage Temperature |
-40°C ~ +80°C |
Relative Humidity |
5 ~ 90% RH, non-condensing |
Power |
|
Protection |
Power reverse polarity protection |
Frame Ground for ESD Protection |
Yes |
Required Supply Voltage |
+10 ~ +30 VDC (non-regulated) |
Power consumption |
2.0 W for μPAC-7186EX-SM |
Download
Odering information
μPAC-7186EX-SM CR |
Palm-size μPAC(80MHz CPU,10/100 Ethernet,640K SRAM,512K Flash ,RS-232*1,RS-485*1, RoHS) |
μPAC-7186EXD-SM CR |
Palm-size μPAC(80MHz CPU,10/100 Ethernet,640K SRAM,512K Flash ,RS-232*1,RS-485*1, RoHS) with 7-segment display |
Số lượng:
Tổng tiền: