Module 8 kênh đầu vào tương tự + 4 kênh đầu ra số kết nối PoE Ethernet Modbus TCP/IP ICP DAS PET-7019

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

PET-7019 CR PoE Ethernet I/O Module with 8-ch universal AI, 4-ch DO (RoHS)

THÔNG TIN SẢN PHẨM

Features

Built-in Web Server
Web HMI
Support for both Modbus TCP and Modbus UDP Protocols
Communication Security
Dual Watchdog
Wide Operating Temperature Range: -25 ~ +75°C
I/O Pair Connection
Built-in I/O
- AI: 8 Channels with 240 Vrms Overvoltage Protection
- DO: 4 Channels

Introduction

The ET-7019/PET-7019 features an extremely excellent protection mechanism where overvoltage protection is up to 240 Vrms. It has wider input range for voltage compared to ET-7017. ET-7019/PET-7019 measures voltage from +/-15 mV ~ +/-10 V. Its input type also includes current and thermocouple. An intuitive design is built in this model, measuring current or voltage simply by a jumper. An external resistor is no longer needed. Eight of its inputs channels can individually be configured with different kinds of analog input. Moreover, the ET-7019/PET-7019 also got open thermocouple detection and many protection mechanisms. The 4 digital output can be set as alarm output with Short-circuit protection and overload protection.

System Specification

Models	ET-7019	PET-7019
Software
Built-In Web Server	Yes
Web HMI	Yes
I/O Pair Connection	Yes
Communication
Ethernet Port	10/100 Base-TX with Auto MDI/MDI-X
PoE	-	Yes
Protocol	Modbus TCP, Modbus UDP
Security	ID, Password and IP Filter
Dual Watchdog	Yes, Module (0.8 seconds), Communication (Programmable)
LED Indicators
L1 (System Running)	Yes
L2 (Ethernet Link/Act)	Yes
L3 (Ethernet 10/100 M Speed)	Yes
PoE Power	-	Yes
2 Way Isolation
Ethernet	1500 VDC	-
I/O	2500 VDC	2500 VDC
EMS Protection
ESD (IEC 61000-4-2)	4 kV Contact for Each Terminal and 8 kV Air for Random Point
EFT (IEC 61000-4-4)	+/-4 kV for Power
Power
Reverse Polarity Protection	Yes
Powered from Terminal Block	Yes, 10 ~ 30 VDC	Yes, 12 ~ 48 VDC
Powered from PoE	-	Yes, IEEE 802.3af, Class1
Power Output	-	-
Consumption	2.6 W (Max.)	2.9 W (Max.)
Mechanical
Dimensions (W x L x H)	72 mm x 123 mm x 35 mm
Installation	DIN-Rail or Wall mounting
Environmental
Operating Temperature	-25 ~ +75 °C
Storage Temperature	-30~ +80 °C
Humidity	10 ~ 90% RH, non-condensing

I/O Specification

Analog Input
Channels		8 (Differential)
Sensor Type		+/-15 mV, +/-50 mV, +/-100 mV, +/-150 mV, +/-500 mV, +/-1 V, +/-5 V, +/-10 V, +/-20 mA, 0~20 mA, 4~20 mA
		Thermocouple (J, K, T, E, R, S, B, N, C, L, M, , and L_DIN43710)
Strain Gauge Type		Full-Bridge, Half-Bridge, and Quarter-Bridge
Individual Channel Configuration		Yes
Resolution		16-bit
Sampling Rate		10 samples/Second total
Accuracy		+/-0.1 % or better
Zero Drift		+/-10 μV/°C
Span Drift		+/-25 ppm/°C
Overvoltage Protection		240 Vrms
Input Impedance	Voltage	>1 MΩ
	Current	125 Ω
Common Mode Rejection		86 dB Min.
Normal Mode Rejection		100 dB
Open Wire Detection		Yes
Virtual Channel to Channel Isolation		+/-400 VDC
Digital Output
Channels		4
Type		Isolated Open Collector
Sink/Source (NPN/PNP)		Sink
Max. Load Current		700 mA/Channel
Load Voltage		5 VDC ~ 50 VDC
Overvoltage Protection		60 VDC
Overload Protection		1.4 A
Short-circuit Protection		Yes
Power-on Value		Yes, Programmable
Safe Value		Yes, Programmable
Note: We recommend to choose ET-7018Z for accurate thermocouple measurement

Download

Download Center

Data sheet

Certification

Odering information

ET-7019 CR	Ethernet I/O Module with 8-ch universal AI, 4-ch DO (RoHS)
PET-7019 CR	PoE Ethernet I/O Module with 8-ch universal AI, 4-ch DO (RoHS)

Module 8 kênh đầu vào tương tự + 4 kênh đầu ra số kết nối PoE Ethernet Modbus TCP/IP ICP DAS PET-7019

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng