Bộ chuyển đổi Modbus Gateway 1 cổng RS-232 + 1 cổng RS-485 sang Ethernet (PoE) ICP DAS PPDS-720D-MTCP

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

PPDS-720D-MTCP CR Programmable (1x RS-232 and 1x RS-485) Serial-to-Ethernet Device Server with PoE, Modbus Gateway and LED Display (RoHS) Includes CA-0910 Cable

Gọi +84 904251826 để được trợ giúp

Bộ chuyển đổi Modbus Gateway 1 cổng RS-232 + 1 cổng RS-485 sang Ethernet (PoE) ICP DAS PPDS-720D-MTCP

Features

  • Incorporate Serial Devices in an Ethernet network
  • "Virtual COM" Extend COM Ports
  • Virtual COM supports 32-bit and 64-bit Windows 7 SP1/10/2012/2016
  • Powerful Programmable Device Server
  • Watchdog Timer suitable for use in harsh environments
  • Power Reverse Polarity Protection
  • Serial Port +/-4 kV ESD Protection Circuit
  • Self-Tuner ASIC Controller on the RS-485 Port
  • 5-digit LED Display (for versions with a display)
  • RoHS Compliant with no Halogen
  • Built-in High Performance MiniOS7 from ICP DAS
  • 10/100 Base-TX Ethernet, RJ-45 Port (Auto-negotiating, auto MDI/MDI-X, LED indicator)
  • ODM Service Is Available
  • Low power consumption
  • Palm-Sized with multiple Serial Ports
  • Supports Modbus TCP to RTU/ASCII Gateway
  • Supports PoE (IEEE 802.3af, Class 1) [PPDS-720(D)-MTCP only]

Introduction

The PDS-700 series is a family of Programmable Device Servers, also known as "Serial-to-Ethernet gateway", that are designed for linking RS-232/422/485 devices to an Ethernet network. The user-friendly VxComm Driver/Utility allows users to easily turn the built-in COM ports of the PDS-700 series into standard COM ports on a PC. By virtue of its protocol independence, a small-core OS and high flexibility, the PDS-700 series is able to meet the demands of every network-enabled application.
 
The PDS-700 series includes a powerful and reliable Xserver programming structure that allows you to design your robust Ethernet applications in one day. The built-in, high-performance MiniOS7 boots the PDS-700 up in just one second and gives you fastest response. It also works as a Modbus TCP to RTU/ASCII gateway that supports most SCADA/HMI communications based on the Modbus/TCP protocol.
 
The PPDS-700-MTCP series features true IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) using a standard category 5 Ethernet cable to receive power from a PoE switch like the NS-205PSE.
 
The PDS-720(D) and PPDS-720(D)-MTCP is equipped with 1 RS-232 port and 1 RS-485 port. The removable on-board terminal block connector is designed for easy and robust wiring in industrial situations.

Specification

CPU Module
CPU 80186-80 MHz or compatible
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles
Flash 512 KB; Erase unit is one sector (64 KB); 100,000 erase/write cycles
SRAM 512 KB
Watchdog Timer Yes

 

LED Indicators
Status 1 x Power
5 x digit 7 Segment

 

COM Ports
Ports 1 x 5-wire RS-232
1 x RS-485
Baud Rate 115200 bps Max.
Bias Resistor Yes, 1 KΩ
Parity None, Even, Odd, Mark, Space
None parity is required when using 8 data bits and 2 stop bits on COM1/COM2.
Data Bit 7, 8: for COM1 and COM2
Stop Bit 1, 2: for COM1 ~ COM2
Node Address 254 (max.)

 

Ethernet
Ports 10/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator)

 

Power
Consumption 2.9 W
Powered from PoE IEEE 802.3af, Class 1
Powered from Terminal Block +12 ~ 48 VDC

 

Mechanical
Casing Plastic
Dimensions (mm) 72 mm x 112 mm x 35 mm (W x H x D)
Installation DIN-Rail or Wall mounting

 

Environmental
Operating Temperature -25 ~ +75 °C
Storage Temperature -40 ~ +80 °C
Humidity 5 ~ 90% RH, non-condensing

Download

Datasheet

Document

Ordering information

PPDS-720D-MTCP     CR  Programmable (1x RS-232 and 1x RS-485) Serial-to-Ethernet Device Server with PoE, Modbus Gateway and LED Display (RoHS)
Includes CA-0910 Cable

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: