Module USB 5 kênh AI + 2 kênh AO + 2 kênh DI + 2 kênh DO ICP DAS USB-2026 CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

USB I/O Module with 5-ch AI, 2-ch AO, 2-ch DI and 2-ch DO

Gọi +84 904251826 để được trợ giúp

Module USB 5 kênh AI + 2 kênh AO + 2 kênh DI + 2 kênh DO ICP DAS USB-2026 CR

Tính năng

• Multifunction (5 AI, 2 AO, 2 DI and 2 DO)
• Overload and Short Circuit Protection for Digital Output
• 240 Vrms Overvoltage Protection for Voltage Input
• 4~20 mA current output provide Open Wire Detection
• Individual Channel Configuration
• USB Bus Powered
• Lockable USB cable
• Driver Free

Giới thiệu

The USB-2026 is a multifunction module that includes 5 analog input channels, 2 analog output channels, 2 digital input channels, 2 digital output channels and compatibles with USB 2.0 full-speed. It equips small size, portable, USB bus powered, various input type features to help user build up own project easily and quickly.

Compare with traditional PC I/O card, it is waste of time to open chassis and configure I/O board. In ICP DAS USB I/O, you will enjoy the simply controlling I/O in the efficient way. ICP DAS USB I/O equips USB bus powered feature, one cable to access I/O and provide power without additional power wiring. ICP DAS USB I/O is a small size module. You can use these I/O modules in wide range application, ex: fan-less control or measurement, automatically testing with BOX-PC…etc.

The USB-2026 provides a programmable input range on all analog input (+/-150 mV, +/-500 mV, +/-1 V, +/-5 V, +/-10 V, +/-20 mA or 0 ~ +20 mA), analog outputs are 12-bit at +/-5 V, +/-10 V, 0 ~ +20 mA or +4 ~ +20 mA and all digital outputs can be set as alarm output. Each analog input can be configured for an individual range and provides a high overvoltage protection of 240 Vrms.

Ứng dụng

  • Automation
  • Measurement and testing
  • Laboratory research

Thông số kỹ thuật

CPU Module
Watchdog Timer 1 Hardware watchdog (1.6 second)
1 Software watchdog (Programmable)
EMS Protection
ESD (IEC 61000-4-2) 4 kV contact for each terminal
8 kV air for random point
LED Indicators
Status 3 x Power and Communication
Analog Input
Channels 5 Differential
Type Voltage
Current
Range Voltage: ±1 V, ±2.5 V, ±5 V, ±10 V
Current: ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA
Resolution Normal Mode: 14-bit
Fast Mode: 12-bit
Accuracy Normal Mode: ±0.1% FSR
Fast Mode: ±0.5 % FSR
Sampling Rate Normal Mode: 10 Hz
Fast Mode: 200 Hz
Input Impedance Voltage: 20 MΩ
Current: 135 Ω
Overvoltage Protection Voltage: 120 VDC
Current: N/A
Overcurrent Protection Voltage: N/A
Current: Yes, 50 mA at 110 VDC
Zero Drift ±20 μV/°C
Span Drift ±25 ppm/°C
Analog Output
Channels 2
Range Voltage: +0 ~ +5 VDC, +0 ~ +10 VDC, ±5 VDC, ±10 VDC
Current: +0 ~ +20 mA, +4 ~ +20 mA
Resolution 12-bit
Accuracy ±0.1% of FSR
Open Wire Detection Yes, for 4 ~ 20 mA only
Voltage Output Capability 10 V @ 20 mA
Power-on Value Yes
Safe Value Yes
Digital Input/Counter
Channels 2
Type Dry Contact, Source
ON Voltage Level Close to GND
OFF Voltage Level Open
Max. Counts 32-bit
Frequency 100 Hz
Min. Pulse Width 10 ms
Input Impedance 10 KΩ, 0.5 W
Overvoltage Protection ±57 VDC
Digital Output
Channels 2
Type Isolation Open Collector (Sink)
Load Voltage +3.5 ~ +50 VDC
Load Current 700 mA/Channel
Overvoltage Protection ±60 VDC
Overload Protection 1.4 A (with short-circuit protection)
Short-circuit Protection Yes
Power on Value Yes, Programmable
Safe Value Yes, Programmable
USB
Specification USB 2.0 Full-Speed (12Mbps)
Power
Consumption 2.2 W
Mechanical
Dimensions (mm) 33 x 110 x 96 (W x L x H)
Environment
Operating Temperature -25 ~ +75 °C
Storage Temperature -40 ~ +85 °C
Humidity 10 ~ 95% RH, Non-condensing


Download

Datasheet

Documents

Odering information

USB-2026     CR  USB I/O Module with 5-ch AI, 2-ch AO, 2-ch DI and 2-ch DO (RoHS)
Includes 1.5M USB Cable (CA-USB15)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: