Module CANopen Slave 14 kênh DI ICP DAS CAN-2053C CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

CANopen Slave Module of 16-channel Isolated (Wet) DI

Gọi +84 904251826 để được trợ giúp

Module CANopen Slave 14 kênh DI ICP DAS CAN-2053C CR

Features

  • NMT Slave
  • Providing I/O Pair-connection function
  • Provide default EDS file
  • Passed the validation of CiA CANopen Conformance Test tool
  • Support Polarity Input Setting and Save
  • Support Dynamic PDO
  • Support Application: PNP, NPN, TTL, and Relay Contact
  • ESD Protection 4 kV Contact for each channel 

Introduction

CAN-2053C module follows the DS-301 version 4.02 and DSP-401 version 2.1. You can access the digital input status and set the configuration by using standard CANopen protocol. CAN-2053C has passed the validation of the CiA CANopen Conformance Test tool. Therefore, you can use it with standard CANopen master easily by applying the EDS file. CAN-2053C has 16-channel isolated sink/source input. It can be used to various applications, such as PNP, NPN, TTL, relay contact and so forth. By owing to the CANopen masters of ICP DAS, you can quickly build a CANopen network to approach your requirements. For more information about the CANopen master interfaces and other CANopen products, please refer to the following web site.

Specification

CPU Module
Watchdog Timer Hardware watchdog

 

LED Indicators
Status 3 LEDs to PWR, RUN and ERR

 

Digital Input
Channels 16 (Sink/Source)
Wet Contact, ON Voltage Level +3.5 ~ +30 VDC
Wet Contact, OFF Voltage Level +1 VDC Max.
Input Impedance 3 kΩ, 0.3 W

 

CANopen
Transceiver NXP TJA1042
Baud Rate 10 k ~ 1 M
Isolation 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Terminal Resistor Built-in 120Ω
Porotocol CiA 301 v4.02, CiA 401 v2.1
Node ID 1 ~ 99
No. of PDOs 10 RxPDO , 10 TxPDO
PDO Mode Event Triggered, Remotely requested, Cyclic and acyclic SYNC
Error Control Node Guarding protocol / Heartbeat Producer
NMT Slave
EMCY Message Yes

 

Power
Consumption 1.5 W

 

Mechanical
Dimensions (mm) 33 x 99 x 78 ( W x L x H )
Installation DIN-Rail

 

Environmental
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing

Download

Data sheet

Documents

Ordering information

CAN-2053C     CR  CANopen Slave Module of 16-channel Isolated Sink/Source Digital Input (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: