Module CANopen Slave 8 kênh DI + 8 kênh DO ICP DAS CAN-2054C CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

CANopen Slave Module of 8-channel Isolated (Wet) DI, 8-channel Isolated (Sink, NPN) DO

Gọi +84 904251826 để được trợ giúp

Module CANopen Slave 8 kênh DI + 8 kênh DO ICP DAS CAN-2054C CR

Features

  • NMT Slave
  • Providing Pair-Connect function
  • Provide default EDS file
  • ESD Protection 4 KV Contact for each channel
  • Support Power Supply +10 ~ +30 VDC
  • Support CiA DS-301 v4.02, DSP-401 v2.1
  • Support PDO Mapping 

Introduction

CANopen is one kind of the network protocols based on the CAN bus and mainly used for embedded network of machine control, such as industrial machine control , aircraft engines monitoring, factory automation, medical equipment control, remote data acquisition, environmental monitoring, and packaging machines control, etc. CAN-2054C module follows the CiA DS-301 version 4.02 and DSP-401 version 2.1. You can access the digital I/O status and set the configuration by using standard CANopen protocol. CAN-2054C has passed the validation of the CiA CANopen conformance test tool. Therefore, you can use it with standard CANopen master easily by applying the EDS file. CAN-2054C has isolated sink/source input 8 channel and isolated sink output 8 channel, It can be used to various applications, such as PNP, NPN, TTL, relay contact and so forth. By owing to the CANopen masters of ICP DAS, you can quickly build a CANopen network to approach your requirements. For more information about the CANopen master interfaces and other CANopen products, please refer to the following web site.

Specification

CPU Module
Watchdog Timer Hardware watchdog

 

LED Indicators
Status 3 LEDs to PWR, RUN and ERR

 

Digital Input
Channels 8 (Sink/Source)
Wet Contact, ON Voltage Level +3.5 ~ +30 VDC
Wet Contact, OFF Voltage Level +1 VDC Max.
Input Impedance 3 kΩ, 0.3 W

 

Digital Output
Channels 8 (Sink)
Type Open-collector
Load Voltage +5 ~ +30 VDC
Max. Load Current 700 mA per channel
Intra-module Isolation 3750 Vrms

 

CANopen
Transceiver NXP TJA1042
Baud Rate 10 k ~ 1 M
Isolation 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Terminal Resistor Built-in 120Ω
Porotocol CiA 301 v4.02, CiA 401 v2.1
Node ID 1 ~ 99
No. of PDOs 10 RxPDO , 10 TxPDO
PDO Mode Event Triggered, Remotely requested, Cyclic and acyclic SYNC
Error Control Node Guarding protocol or Heartbeat Producer
NMT Slave
EMCY Message Yes

 

Power
Consumption 1.5 W

 

Mechanical
Dimensions (mm) 33 x 99 x 78 ( W x L x H )
Installation DIN-Rail

 

Environmental
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing

Download

Data sheet

Documents

Ordering information

CAN-2054C     CR  CANopen Slave Module of 8-channel DI and DO (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: