Module CPU Cimon CM1-CP4U

Thương hiệu: CIMON | Tình trạng: Còn hàng

Liên hệ

Module CPU Cimon CM1-CP4U

Features

PID Control
- It operates 32Loops PID without PID module.
RTC (Except CP*A type)
- It reads time from RTC and save it in F memory device.
Input and Output Reservation
- It scans and detects module at designated slot.
- It refers to reservation function which writes a program without I/O change in case of extension,
  damage or module replacement.
Online Edit
- Scan program can be edited when CPU is RUN mode(Online).
RS-232 Port (XPnB, CP3C, CP3E, CP4E/F)
RS-422/485 Port (CP4D/U, CP4F)

Watch-Dog Timer
- It detects delayed operation error in program.
Module installation in Slot
- It detects whether module is installed in slot.
Memory Error
- In case of Error in Flash memory of CPU module or Dual Port Ram of Special module, Error will save
  in F memory device.
Battery Error
- If battery goes down under standard voltage, F3.4 will be turned ON.
Power Error
- If input voltage to Power module is lower than standard range, RUN and STOP lamp will blink.

Performance Specification

Items		Specification
Items		CM1-CP3A/B/P/U	CM1-CP4A/B/C/D/U
Program Control Method		Stored Program, Cyclic operation, Time Driven Interrupt
I/O Control Method		Indirect and Directed by instruction
Program Language		IL(Instruction List), LD(Ladder Diagram), FBD(Function Block Diagram)
		FBD Extension – CP3E,4E,4F only
		SFC(Sequential Function Chart) – CP3E,4E,4F only
Data Processing Method		32 Bit
Instructions	Sequence	55 Instruction
Instructions	Application	293 Instruction
Processing speed		200ns / Step (Sequence)
Program Capacity		32K Step	16K Step
Program Capacity		512Kbyte	256Kbyte
BASE Extension		Extendable (Maximum 16 Bases)	Not Extendable
Data memory capacity		512Kbyte	256Kbyte
Device Memory	X	1,024	384
	Y	1,024	384
	M	8,192
	K	2,048
	L	2,048
	F	2,048
	T	1,024(Select 10ms or 100ms)
	C	1,024
	S	100Card ^* 100Step
	D	10,000	5,000
	Z	1,024
	Q	512 words (CP3E, CP4E/F only)
	R	16 words
Timer	Types	On delay, Off Delay, Integration, Monostable, Retriggerable
Timer	Time range	0.01sec ~ 6,553.5sec
Counter	Types	Up Counter, Down Counter, Up-Down Counter, Ring Counter
Counter	range	-32,768 ~ +32,767
Operation modes		LOCAL or REMOTE (RUN, STOP, PAUSE MODE)
Self-Diagnosis		Watchdog timer, Memory error, I/O error, Battery error, Power error detection
Battery Back-up		Over 8 years
Built-in Function		Computer Link – RS232C: A/B/P/U type – USB 2.0: E/F/U type Program Editable on Run Mode Clock (RTC, except A type) PID Control (32 Loops) RS-232 1CH (optional) RS-422/485 1CH(optional) I/O Reservation

Download

Data sheets