Bộ lập trình điều khiển Logic PLC Cimon CM3-SP32MDTV

Thương hiệu: CIMON | Tình trạng: Còn hàng

Liên hệ

THÔNG TIN SẢN PHẨM

Bộ lập trình điều khiển Logic PLC Cimon CM3-SP32MDTV

Built-in Functions

PID Control
- It operates 32LOOP PID without PID module.
RTC
- It reas time from RTC and save it in F device address.
I/O reservation
- It scans module at designated slot.
  It refers to reservation function which writes a program without I/O change in case of expansion, Damage or replacement.
Online Edit
- Program can be edited while Run mode.

Features

SD/MMC Built-in
- Scan program or firmware can be upgraded by SD memory card.
  (Stop mode → Power off → Insert SD card → Power on → Run mode in 5sec → Firmware downloading(wait 20sec) → Confirm flickering RUN, STOP, ERR LED → Remove SD card → Power off → Power on)
20kpps High Speed Counter (2Channel) Built-in.
- 2PH. 2/4 Multi. Input mode possible, Voltage input type (Photocoupler Insulated)
100kpps 2axis Pulse Output built-in. (Positioning)
- Pulse + Direction Output, Position/Speed/Speed-Position, Position-Speed Control.
Max. 3 communications can work simultaneously.
- (Ethernet, RS232, RS485) CIMON HMI, MODBUS RTU/TCP, PLC Link, Protocol program(user protocol), Loader protocol support, Remote access & up/down load support.
Abundant memory (10k Step)
Data reserved in case of Power cut
- Built-in Flash memory enabling permanent backup of program without any separate battery.

Specification

Items		Specification	Remark
Power		DC 12-24V / 10W (In case of maximum expansion)	–
Program Control Method		Cyclic Execution, Time Driven Interrupt	–
I/O Control Method		Indirect method, Directed by program instruction	–
Program language		LD(Ladder Diagram), IL(Instruction List), SFC(Sequential Function Chart)	–
Data Processing Method		32 Bit	–
Instructions	Sequence	55 Instruction	–
Instructions	Application	389 Instruction	–
Processing speed (Sequence)		300 ns/Step	–
Program capacity		10k Step	–
Maximum I/O points		1024 pts	–
Operation mode		Remote Run, Remote Stop	–
Back-up method		K Device Memory, Latched Device Memory	–
Total Program		128	–
Total Program	Scan	Scan, Subroutine, Cold/Hot Start initialization, Periodic Interuupts	–
	Periodic Interrupts	Maximum 16 scan program (Minimum period : 10ms)	–
	Special	PID Control, HSC, Postioning, I/O input Filter	–
	Communication	Serial, EtherNet, MODBUS/RTU Master, MODBUS TCP, High Speed PLC Link	–
	Etc.	SFC, FBD (Function Block Diagram)	–
Self-diagnosis function		WDT(Detects delay of scan time), Memory error, I/O error, Low Battery Power ON/OFF Status	–
Re-start		Cold, Hot Restart	–
Device memory	X	1024 pts (X0000-X063F)	Bit
	Y	1024 pts (Y0000-Y063F)	Bit
	M	8192 pts (M0000-M511F)	Bit
	L	4096 pts (L0000-L255F)	Bit
	K	4096 pts (K0000-K255F)	Bit
	F	2048 pts (F0000-F127F)	Bit
	T	512 pts (T0000-T0511)	Word
	C	512 pts (C0000-C0511)	Word
	S	100 states x 100 set (00.00-99.99)	–
	D	10000 words (D0000-D9999)	Word
	Z	1,024 words(Call Stack: Z0000-Z0063, Z1000-Z1063)	Word
	Q	8192 pts (Q0000-Q511F)	Bit
	R	16 pts (Index)	–
High Speed Counter		1Phase Pulse Input + Direction signal(20kpps) 2 Phase 2Ch (In case of operating 2Ch simultaneously 20kpps)	–
Positioning		X axis: Position / Speed control 100kpps Y axis: Position control 5Kpps, Speed control 100kpps	–
PID		32 Channels, Auto-Tuning	–
RTC		Real Time Clock (Battery CR2032 Backup)	–
Comm. Channel		Built-in : USB Loader(for CICON Program), RS232C 1CH Option : RS485 1Ch / Ethernet 1port(10/100Mbps)	–
Etc.		Floating-point operation, Online edit	–

TR(Sink) DC Power (Source Type: CM3-SP32MDC/V/E/F

Downloas

Data sheets

Manual

CICON Version 6.10

Bộ lập trình điều khiển Logic PLC Cimon CM3-SP32MDTV

Built-in Functions

Features

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng