Bo mạch kết nối 24 kênh đầu ra Realy SSD DC ICP DAS DB-24SSRDC

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

24-ch DC-Type Solid State Relay Board

Gọi +84 904251826 để được trợ giúp

Bo mạch kết nối 24 kênh đầu ra Realy SSD DC ICP DAS DB-24SSRDC

Features

  • 24 FORM A solid-state relays
  • One OPTO-22 Compatible Connector and one 37-pin D-sub connector and one 20-pin connector
  • Connects directly to OPTO-22 compatible board
  • LED’s indicated relay status
  • Screw terminals for easy field wiring

Introduction

The DB-24SSR/DB-24SSRDC includes 24 normally open, or form A, solid-state relays The board interface to filed logic signals, eliminating ground-loop problems and isolating the host computer from damaging voltages. The user can use the DB-24SSR/DB-24SSRDC to switch high voltage load, up to 240 VAC/50 VDC and up to 4 A. The relay is energized by applying a 5-voltage signal to the appropriate relay channel on the 50-pin header or 37-pin D-sub connector. Twenty-four enunciator LEDs, one for each relay, light when their associated relay is activated. Because there is a D-sub 37-pin connector on the board, the user may use it to interface to any TTL output board. In other words, the user may use it as a general purpose solid state relay output board.

Specification

Relay Output
Channels 24 X FORM A
Type SSR
Contact Rating 4 A @ 3~50VDC
Operate Time 1/2 cycle of voltage sina wave 1ms (max)
Electrical Endurance Long Life, No Arcing, No Bounce, No Switching Noise

 

Power
Consumption 0.4 A @ +5 V (max.)

 

Mechanical
Dimensions (mm) 130 mm x 220 mm x 32 mm (W x L x H)

 

Environmental
Operating Temperature 0 ~ 60°C
Storage Temperature -20 ~ 70°C
Humidity 5% ~ 90% RH, non-condensing

Download

Documents

Ordering information

DB-24SSRDC  24-ch DC-Type Solid-State Relay Board
Include: CA-5015 (Flat Cable, 50-pin, 1.5 M)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: