Bộ chuyển đổi 1 kênh điện áp 100V + 1 kênh dòng điện 500A sang tương tự ICP DAS DN-831I-100V-500A CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

1 Channel Voltage Attenuator and 1 Channel Current Transformer (500 A)

Gọi +84 904251826 để được trợ giúp

Bộ chuyển đổi 1 kênh điện áp 100V + 1 kênh dòng điện 500A sang tương tự ICP DAS DN-831I-100V-500A CR

Features

• High Voltage Input and High Current Input Measurement
• Three Way Isolation
• Linear Attenuation Ratio
• High Input Impedance
• 3000 VDC Channel to Channel Isolation
• 4 kV ESD Protection
• 3 kV Surge Protection
• RoHS Compliance
• Easily wire connection
• Operating Temperature: -25 ~ +75 °C

Introduction

The DN-831I-100V-500A is 1-channel voltage attenuator and 1-channel current transformer. The maximum voltage input range is from ±100 V can be attenuated to ±10 V and the maximum current input range is from ±500 A can be attenuated to ±10 V. It provides 3000 VDC intra-modules isolation and 3000 VDC channel to channel isolation to avoid the noise interference from inputs to outputs or channel to channel. It can be used with the analog input modules such as I-7017, I-87017, M-7017RMS and I-87017W-RMS etc. to measure the high current.

Specification

EMS Protection
ESD (IEC 61000-4-2) ±4 kV contact for power line, input and output channels, ±8 kV air for random point
Surge (IEC 61000-4-5) ±3 kV for power liner

 

CT
Type Clip
Inside Diameter Φ21 mm
Leading Cable 1.5 m

 

Analog Input
Channels High Current: 1
High Voltage: 1
Type AC/DC Current
AC/DC Voltage
Range High Current: ±500 A
High Voltage: ±100 VDC
Accuracy High Current: 1% of FSR
High Voltage: 1% of FSR
Bandwidth High Current: 0 ~ 50 KHz
High Voltage: 20 Hz ~ 20 kHz
Isolation High Current: 2.5 KV @ 50 (60) HZ/1 min

 

Analog Output
Channels High Current: 1
High Voltage: 1
Type AC/DC Current
AC/DC Voltage
Range • High Current: ±10 VDC or 10 VAC
• High Voltage: ±10 VDC or 10 VAC

 

Power
Input Range +10 VDC ~ +30 VDC
Consumption 1.8 W

 

Mechanical
Casing Plastic
Dimensions (mm) 103 x 94 x 29 (W x L x D)
Installation DIN-Rail Mounting

 

Environmental
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +75 °C
Humidity 10 ~ 90% RH, Non-condensing

Download

Data sheet

Documents

Ordering information

DN-831I-100V-500A     CR  1 Channel Voltage Attenuator and 1 Channel Current Transformer (500 A) (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: