Bộ đổi nguồn 220VAC/24VDC/2.5A + 5VDC/0.5A 65W ICP DAS DP-660

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

Power Supply, 85~270 VAC to 24 VDC/2.5 A, 5 V/0.5 A, 65 W, DIN-rail mounting

Gọi +84 904251826 để được trợ giúp

Bộ đổi nguồn 220VAC/24VDC/2.5A + 5VDC/0.5A 65W ICP DAS DP-660

Features

  • Input voltage: 85 VAC ~ 270 VAC
  • Input frequency: 47 Hz ~ 63 Hz
  • Inrush current (Cold start):
    less than 30A at 115 VAC
    less than 60A at 230 VAC
  • DC Outputs:
    +24 V/2.5 A
    +5 V/0.5 A
  • Efficiency: higher than 70% at rated load and 115 VAC
  • Holdup time: 16ms at rated load and 115 VAC
  • Over voltage protection: hiccup mode
  • Short circuit protection: latch off
  • Over voltage protection: latch off
  • Operating temperature: 0 ~ 50 °C
  • Cooling: free air convection
  • Storage temperature: -40 °C ~ +85 °C

Introduction

DP-660 is a 65 watts,universal input switching mode power supply.

It is with 24V/5V output options. DP-660 is intended for power device like motor or solenoid application.Build in +5V 3T-regulator for DP-660 is for if there is a logical control circuit.

Specification

Input
Voltage Range 85 VAC ~ 270 VAC
Frequency Range  47 Hz ~ 63 Hz
Inrush Current (Typ.) Cold start:
less than 30A at 115 VAC
less than 60A at 230 VAC

 

Output
Hold Up Time (Typ.) 16ms at rated load and 115 VAC
DC Voltage +24VDC/2.5A
+5 VDC/0.5A
Efficiency higher than 70% at rated load and 115 VAC
Short Circuit Protection  latch off

 

Protection
Over Voltage hiccup mode

 

Mechanical
Casing Matel

 

Environmental
Operating Temperature 0 ~ 50 °C
Storage Temperature  -40 °C ~ +85 °C

Ordering information

DP-660  Power Supply, 85~270VAC to 24VDC/2.5A, 5V/0.5A, 65 W, DIN-rail mounting (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: