Card PCI Express EtherCAT Master 16 trục + 13 kênh vào/ra số DIO +2 kênh đầu vào Encoder ICP DAS ECAT-M801-16AX CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

EtherCAT Master, 16-axis

Gọi +84 904251826 để được trợ giúp

Card PCI Express EtherCAT Master 16 trục + 13 kênh vào/ra số DIO +2 kênh đầu vào Encoder ICP DAS ECAT-M801-16AX CR

Features

• Up to 16-axis motion control
• Up to 64 slaves
• Slave operation (SDO, PDO)
• Axis homing
• Single-axis position and velocity control
• Synchronized motion (E-GEAR, E-CAM)
• Virtual axes
• Multi-group motion control
• Multi-axis linear interpolation
• 2D/3D circular interpolation
• Helical interpolation
• On board 13 DI and 13 DO
• On board 2 encoder interfaces with compare trigger output
• API for CiA402 servo drives and ICP DAS stepper motor control modules
• API for ICP DAS DI/DO and AI/AO modules
• Hardware emergency stop
• Supports software second-order filters with low-pass filters, high-pass filters, and notch filters.
• Slave to Slave communication is supported (topology independent)

Introduction

EtherCAT (Ethernet for Control Automation Technology) is an open, high-performance fieldbus system that makes Ethernet technologies available at the I/O level. EtherCAT provides flexible wiring, fast communication and many other nice features. It needs a master to control many slaves. ICP DAS provides PC master cards for users to build their motion related applications. This card can offer multi-axis motion and I/O control functions by its own built-in CPU. In this way, the CPU loading of PC can be reduced dramatically. In the mean while, ICP DAS also provides many I/O slave modules for users to choose from. Since EtherCAT technology is an industrial standard, those modules can work together in a system with 3rd-party EtherCAT slaves as well.

Application

• Motion control
• I/O control
• Data acquisition system

Specification

Hardware
Connector RJ45 x1
DB-26 (Female)
DB-15 (Female)

 

Encoder Input
Type Quadrant, CW/CCW, Pulse/Dir.
Response Speed 1 MHz
Resolution 32-bit
No. of Axes 2
Compare Trigger Output 2-ch

 

Digital Input
Channels 13
Type Sink/Source
Wet Contact, ON Voltage Level +19 V ~ + 24 V
Wet Contact, OFF Voltage Level +11 V Max.
Isolation 3000 VDC

 

Digital Output
Channels 13
Type Sink (open collector)
Load Voltage +24 V
Max. Load Current 100 mA/ch
Isolation 3000 Vrms

 

COM Ports
Protocol EtherCAT

 

PC Bus
Type PCI Express x1

 

EtherCAT
Ports 1 x RJ-45
No. of Axes Max. 16
No. of Nodes Max. 64
Data Transfer Medium Ethernet Cable (Min. CAT 5e), Shielded

 

Mechanical
Dimensions (mm) 135 x 192 x 21.5 (W x L x D)

 

Environmental
Operating Temperature 0 ~ +60 °C
Storage Temperature -20 ~ +70 °C
Humidity 0 ~ 90% RH, Non-condensing

Download

Data sheet

Documents

Ordering information

ECAT-M801-16AX     CR  EtherCAT Master, Max. 16-Axis Synchronously, 13-channel Digital I/O, 2-Axis Encoder (RoHS)
without cables and daughter board

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: