ENCODER300 CR: Card ISA 3 trục đầu vào bộ đếm Encoder

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

ENCODER300 ISA Bus, 3-axis Encoder Interface Card Include: CA-PC25M (25-pin Male D-Sub Connector with Plastic Cover)

Gọi +84 904251826 để được trợ giúp

ENCODER300 CR: Card ISA 3 trục đầu vào bộ đếm Encoder

Features

• Accepts Inputs from Incremental or Quadrature Encoders
• 3 independent axes
• Max. Quadrature Input Frequency: 1 MHz
• Counts per Encoder Cycle: X1, X2, X4 (Software selectable)
• Encoder Input Modes: Quadrature , Up/Down , Pulse/Direction

Introduction

The ENCODER300 is a 3-axis quadrature encoder interface board for IBM PC/AT bus-compatible devices. Phase 0, phase 90 and index pulse inputs are provided for each encoder. Inputs may be single ended (A, B or C) or differential (A+, A-, B+, B-, C+ or C-). Power and ground connections are also provided for use by the encoder if needed. Inputs are conditioned by a four-stage digital filter, and the maximum input rate in quadrature decode mode is 1 MHz. The conditioned inputs are applied to a 16-bit counter, which may be used for quadrature decoding, pules or direction-input counting, or as a pulse input up/down counter.

Specification

Software
OS Support Windows 95/98/ME/NT4.0
Library DOS 6.2

 

Hardware
Connector 25-pin D-Sub

 

General
No. of Axes 3

 

Encoder Input
Mode Quadrant, CW/CCW, PULSE/DIR
Counting Rate 1 MHz (Max.)

 

Pulse Output
Counter Width 16-bit

 

PC Bus
Type ISA Bus

 

Power
Consumption +5 V @ 500 mA

 

Environmental
Operating Temperature 0 ~ +60°C
Storage Temperature -20 ~ +80°C
Humidity 5 ~ 85% RH, non-condensing

Download

Data sheet

Documents

Odering information

ENCODER300  ISA Bus, 3-axis Encoder Interface Card
Include: CA-PC25M (25-pin Male D-Sub Connector with Plastic Cover)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: