Module 2 cổng Ethernet Modbus TCP 4 kênh AI + 4 kênh AO + 4 kênh DI ICP DAS ET-7204 CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

Ethernet I/O Module with 2-port Ethernet Switch, 4-ch AI, 4-ch AO and 4-ch DI

Gọi +84 904251826 để được trợ giúp

Module 2 cổng Ethernet Modbus TCP 4 kênh AI + 4 kênh AO + 4 kênh DI ICP DAS ET-7204 CR

Features

  • Built-in Web Server
  • Web HMI
  • Support for both Modbus TCP and Modbus UDP Protocols
  • Communication Security
  • 2-port Ethernet Switch for Daisy-Chain Topology
  • Dual Watchdog
  • Wide Operating Temperature Range: -25 ~ +75°C
  • I/O Pair Connection
  • Built-in I/O
    • AI: 4 Channels
    • AO: 4 Channels
    • DI/Counter: 4 Channels

Introduction

The ET-7204 is a multi-function module with 4-channel analog inputs, 4-channel analog outputs, 4-channel digital inputs. It provides various programmable analog inputs (+/-500 mV, +/-1 V, +/-5 V, +/-10 V, +/-20 mA, 0 ~ 20 mA and 4 ~ 20 mA), and analog outputs (+/-5 V, +/-10 V, 0 ~ 20 mA and 4 ~ 20 mA). Each analog input is allowed to configure a proper range with 240 Vrms high voltage protection. Each analog input/output can be programmed to accept current or voltage as input/output depending upon the position of corresponding jumper.

Specification

CPU Module
Watchdog Timer Yes, Module (0.8 second), Communication (Programmable)

 

EMS Protection
EFT (IEC 61000-4-4) ±2 kV for Power Line
ESD (IEC 61000-4-2) ±4 kV Contact for Each Terminal
±8 kV Air for Random Point
Surge (IEC 61000-4-5) ±2 kV for Power Line

 

LED Indicators
Status 1 x Power, 2 x Ethernet, 16 x I/O

 

Software
Built-in Web Server Yes

 

Analog Input
Channels 4 (Differential)
Type Voltage
Current
Range ±500 mV, ±1 V, ±5 V, ±10 V
+0 mA ~ +20 mA, ±20 mA, 4 ~ 20 mA (jumper selectable)
Resolution 16-bit
Accuracy Normal Mode: ±0.1%
Fast Mode: ±0.5% or better
Sampling Rate Normal Mode: 10 Samples/Second (Total)
Fast Mode: 50 Samples/Second (Total)
Input Impedance Voltage: 2 MΩ
Current: 125 Ω
Common Mode Rejection 86 dB Min.
Normal Mode Rejection 100 dB
Common Voltage Protection ±200 VDC
Overvoltage Protection 240 Vrms
Overcurrent Protection Yes, 50 mA at 110 VDC/VAC Max.
Individual Channel Configuration Yes
Open Wire Detection Yes
Zero Drift ±20 μV/°C
Span Drift ±25 ppm/°C
Isolation ±400 VDC, Virtual Channel to Channel Isolation

 

Analog Output
Channels 4
Type Voltage
Current
Range +0 VDC ~ +5 VDC, ±5 VDC, +0 VDC ~ +10 VDC, ±10 VDC
+0 mA ~ +20 mA, +4 mA ~ +20 mA (Jumper Selectable)
Resolution 12-bit
Accuracy ±0.1% of FSR
Open Wire Detection Yes, for 4 ~ 20 mA only
Voltage Output Capability 20 mA @ 10 V
Current Load Resistance 400 Ω
Individual Channel Configuration Yes
Power on Value Yes, Programmable
Safe Value Yes, Programmable

 

Digital Input/Counter
Channels 4
Wet Contact, ON Voltage Level +1 VDC Max.
Wet Contact, OFF Voltage Level +3.5 VDC ~ +30 VDC
Dry Contact, ON Voltage Level Open
Dry Contact, OFF Voltage Level Close to GND
Dry Contact, Effective Distance 500 M Max.
Max. Counts 4,294,967,285 (32 bits)
Frequency 100 Hz
Min. Pulse Width 5 ms
Overvoltage Protection 30 VDC

 

Ethernet
Ports 2 x RJ-45, 10/100 Base-TX, Swtich Ports
Security ID, Password and IP Filter
Protocol Modbus TCP, Modbus UDP

 

Power
Reverse Polarity Protection Yes
Consumption 4.9 W
Powered from Terminal Block 12 ~ 48 VDC

 

Mechanical
Dimensions (mm) 76 mm x 120 mm x 38 mm (W x L x H)
Installation DIN-Rail or Wall mounting

 

Environmental
Operating Temperature -25 ~ +75°C
Storage Temperature -30 ~ +80°C
Humidity 10 ~ 90% RH, Non-condensing

Download

Data sheet

Documents

Ordering information

ET-7204     CR  Ethernet I/O Module with 2-port Ethernet Switch, 4-ch AI, 4-ch AO and 4-ch DI (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: