Module 8 kênh đầu vào tốc độ cao HSC ICP DAS F-8084 CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

8-ch Isolated High Speed Pulse Input Redundant Module

THÔNG TIN SẢN PHẨM

Features

32-bit counter
8 up-counter/frequency channels
1 ~ 32767 us digital filter
Falling/Rising/Both edge trigger
RoHS compliance
3000 VDC isolation from output to backplane
3000 VDC isolation from output to frame ground
Redundancy
No error counting when redundant switching

Introduction

The F-8084 is a 32-bit high speed up-counter/frequency module. It can count up to 500 KHz input signal, and accuracy of the frequency mode is +/-0.4% FSR. The F-8084 features many diagnostic like some failures of communication, EEPROM, WDT, decoder, etc. When the modules are in the redundant mode and a failure occurs the slave module will take over as soon as possible. Moreover, the redundant switching is not only fast but also reliable for data exchanging. Thus, users can easily to use F-8084 to count.

Applications

Building Automation
Factory Automation
Machine Automation
Remote Maintenance
Remote Diagnosis

Specifications

EMS Protection
EFT (IEC 61000-4-4)	Yes
ESD (IEC 61000-4-2)	Yes

LED Indicators
Status	1 x RUN, 1 x ACT, 1 x DUX and Communication (32 as channel 0~31 status)

Counter/Frequency/Encoder Input
Channels	8
Type	Counter/Frequency
ON Voltage Level	4.5 VDC~ 30 VDC
OFF Voltage Level	< 1 VDC
Frequency Accuracy	1 Hz ~ 500 KHz
Low Pass Filter	Yes (1 ~32767 us)
Input Impedance	200/500/1KΩ or none (5 KΩ)

I/O Expansion
I/O Type	DN-PI-M

Power
Consumption	1.9 W

Mechanical
Dimensions (mm)	30 x 85 x 115
Weight	300 g

Environment
Operating Temperature	-25 °C ~ +75 °C
Humidity	5 ~ 95% RH, Non-condensing

Download

Datasheet

Documents

Ordering Information

F-8084 CR

8-ch Isolated High Speed Pulse Input Redundant Module (RoHS)

Module 8 kênh đầu vào tốc độ cao HSC ICP DAS F-8084 CR

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng