Bộ hiển thị cầm tay và lưu trữ dữ liệu (Datalogger) cho cảm biến đo Momen, Lực, Load Cell, Strain Gauge Lorenz GM80

Thương hiệu: Lorenz Messtechnik | Tình trạng: Còn hàng

Liên hệ

Measuring Amplifier with Data Logger

THÔNG TIN SẢN PHẨM

The measuring amplifier can process sensor strain gauge (SG) signals of ±3.3 mV/V and active signals of ±10V and 0/4 ... 20 mA.

The measuring amplifier can be used mobile by battery or accumulator operation, but can also be supplied with an external main adapter.

A high measuring accuracy combined with fast measuring rates is ensured by the employment of highly precise amplifiers and components, 16 bit A/D converters and a fast microcontroller.

A versatile configurable data logger stores a series of measurements with date and up to 15288 measured values.

Measured values or logging values can be expelled to a computer or printer via the USB or RS232 interface.

Ten parameter sets are available for sensors. Therein, in each case, the calibration data, the sensor designation and physical unit are deposited.

Functions such as tare, fetch min./max. and delete min./max. are available during the measurement.

The data logger or the interface can be controlled externally via an additional trigger input.
At low measuring rates, the strain gauge supply is clocked power-saving. If the GM80 is not in measuring mode, the device shuts off after three minutes.

Data logger up to 15000 measured values
Trigger input for external control
For active or passive sensors
Fast measurement up to 1000/s
Mains, battery and accumulator operations
Display of the physical unit
10 sensor parameter sets
RS232 interface
Min./max. storage
USB interface

Type:	GM80
Technical Details:	Measuring Amplifier with Data Logger for over 15000 Measured Values for Active and Passive Sensors, USB-Interface, RS 232-Interface, 10 Sensor Parameter Sets, Fast Measurement of up to 1000/s, Mains-Independent and with freely available Configuration and Evaluation Software GM80-VS2. Software and Driver Download
Suitable Connection Cable (PDF Datasheet):	Connection cable for passive sensors, 3 m, with 5-pin female cable connector and 15‑pin D‑SUB- male cable connector Connection cable for passive sensors, 3 m, with 7-pin female cable connector and 15‑pin D‑SUB- male cable connector Connection cable for passive sensors, 3 m, with 6-pin female cable connector and 15‑pin D‑SUB- male cable connector Connection cable for passive sensors, 3 m, with 12-pin female cable connector and 15‑pin D‑SUB- male cable connector Connection cable for active sensors, 3 m, with 8-pin female cable connector and 15‑pin D‑SUB- male cable connector Connection cable for active sensors, 3 m, with 12-pin female cable connector and 15‑pin D‑SUB- male cable connector
PDF Datasheet:	081021_GM80_en.pdf
PDF Operation Manual:	090162q_gm80_en.pdf

Bộ hiển thị cầm tay và lưu trữ dữ liệu (Datalogger) cho cảm biến đo Momen, Lực, Load Cell, Strain Gauge Lorenz GM80

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng