GW-7552-B CR: Bộ chuyển đổi Gateway PROFIBUS sang Modbus RTU/ASCII

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

GW-7552-B CR PROFIBUS to Modbus Gateway (Plastic Case) (RoHS)

Gọi +84 904251826 để được trợ giúp

GW-7552-B CR: Bộ chuyển đổi Gateway PROFIBUS sang Modbus RTU/ASCII

Features

• Protocol & Hierarchy : DP-V0 Slave
• Supports PROFIBUS Transmission Rate (Kbps) : 9.6, 19.2, 45.45, 93.75, 187.5, 500, 1500, 3000, 6000, 12000
• Transmission Rate Setting : detected automatically
• Max Input Data Length : 132 Bytes
• Max Output Data Length : 131 Bytes
• Address Setting : 0~126 set by DIP switch
• Supports Modbus Mode : Master/Slave
• Supports Modbus Format : RTU/ASCII
• Hybrid COM 1 : RS-232/422/485 with “Self Tuner” inside
• Supports COM 1 Baudrate (Kbps) : 2.4, 4.8, 9.6, 19.2, 38.4, 57.6, 115.2
• Supports COM 1 Data Format : 7/8 data bits, No/Odd/Even parity, 1/2 stop bit
• Indicators : PWR, ERR, and RUN LEDs
• Network Isolation Protection : High Speed iCoupler
• DC Isolation Protection : 3000VDC on PROFIBUS side

Introduction

The GW-7552 Gateway is specially designed for the slave device of PROFIBUS DP protocol. It allows the PROFIBUS master to access the Modbus devices. These Modbus devices may be a PLC, a sensor, ICPDAS M-7000 series modules and so forth. In addition, we also provide the utility software for users to configure the GW-7552. By using this module, users can put their Modbus devices into PROFIBUS network very easily.

Application

• Industrial Automation
• Factory Automation
• Process Automation
• Etc…

Specifications

CPU Module
CPU 80186, 80 MHz or compatible
EEPROM 16 KB
Flash 512 KB
SRAM 512 KB
Watchdog Timer Watchdog IC
CPU built-in

 

LED Indicators
Status PWR LED, RUN LED, ERR LED

 

COM Ports
Ports RS-232/RS-422/RS-485(can’t be used simultaneously)
3-pin screwed terminal block (RxD, TxD, GND)
4-pin screwed terminal block (RxD+, RxD-, TxD+, TxD-)
2-pin screwed terminal block (DATA+, DATA-)
Baud Rate 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
Parity None, Even, Odd
Data Bit 7, 8
Stop Bit 1, 2

 

PROFIBUS
Controller Siemens SPC3
Transceiver ADI ADM2486
Baud Rate 9.6 k, 19.2 k, 45.45 k, 93.75 k, 187.5 k, 500 k, 1.5 M, 3 M, 6 M, 12 M
Isolation 3000 VDC for DC-to-DC, 2500 Vrms for bus-to-logic
Protocol DP-V0

 

Power
Consumption 2.5 W

 

Mechanical
Dimensions (mm) 72 x 33 x 119 (W x L x H)
Installation DIN-Rail

 

Environmental
Operating Temperature -25 ~ +75℃
Storage Temperature -30 ~ +85 ℃
Humidity 5 ~ 95% RH, Non-condensing

Download

Data sheet

Documents

Ordering information

GW-7552-B     CR  PROFIBUS to Modbus Gateway (Plastic Case) (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: