I-2533CS CR: Bộ chuyển đổi CAN sang quang( 2 Sợi Quang, Single-mode, SC, 30KM)

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

I-2533CS CR CAN to Single-mode Fiber Bridge; 1 (30 km) single-mode, SC connector (RoHS)

THÔNG TIN SẢN PHẨM

Features

Fiber Type: SC ; Single mode ; 100 Base-FX
Maximum transmission distance up to 30 km at any CAN baud rate
NXP TJA1042 CAN transceiver
2500 Vrms isolation on the CAN side
Supports both CAN 2.0A and CAN 2.0B
Fully compatible with the ISO 11898-2 standard
Rotary switch for CAN baud rate configuration
Build-in switch for 120 Ω terminal resistor
Removable terminal block, Mount easily on DIN-Rail
Allows user-defined CAN baud rate
Fiber broken line detection
Utility tool for CAN message filter configuration
The CAN port with the same Group ID can communicate with each other

Introduction

The I-2533CS is a local CAN bridge used to establish a connection between two CAN bus system via single mode fiber optic transmission medium. In order to solve the problem between CAN and fiber transmission medium, the I-2533CS is specially designed for converting the electrical CAN bus signal to fiber optic cables. I-2533CS has three more important features. First, the transmission distance limitation of the CAN bus system will not affected due to the different CAN baud rate. It means that the total CAN bus working distance can be extended. Second, the bus error on one CAN network will not affect the operation of another CAN network. Finally, the two CAN network can communication with each other by using different CAN baud rate for highly flexibility.

The I-2533CS series is designed for single mode fiber, and allow to extern CAN bus to maximum 30 km. Besides, I-2533CS provides the group function, which is the basic message router. Users can decide the CAN message flows between several CAN bus systems. I-2533CS series also provides the utility tool for user-defined baud rate and filter configuration. By using this tool, it is allowed to have user-defined baud rate and CAN message filter. When users use the I-2533CS series on two CAN network with different CAN baud rate, it may be useful to reduce the bus loading of the network which has low baud rate.

Specifications

Download

Data sheet

Documents

Ordering information

I-2533CS CR

CAN to Single-mode Fiber Bridge; 1 (30 km) single-mode, SC connector (RoHS)

I-2533CS CR: Bộ chuyển đổi CAN sang quang( 2 Sợi Quang, Single-mode, SC, 30KM)

Features

Specifications

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng