Module RS-485 DCON 6 kênh đầu vào RTD (3 dây) ICP DAS I-7015P-G CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

6-ch RTD Input Module with 3-wire Lead Resistance Elimination

Gọi +84 904251826 để được trợ giúp

Module RS-485 DCON 6 kênh đầu vào RTD (3 dây) ICP DAS I-7015P-G CR

Features

• 6-channel RTD Input
• 3-wire RTD Input with Lead Resistance Elimination
• High Resolution: 16-bit
• Individual Channel Configuration
• Open Wire Detection
• 4 kV ESD Protection
• 4 kV EFT Protection
• 3000 VDC Intra-module Isolation
• Dual Watchdog
• Wide Operating Temperature Range: -25 to +75°C

Introduction

The I-7015 is a series of 6-channel RTD input modules that are used for measuring temperatures using RTD sensors and each channel can be connected to a different type of sensor. The I-7015P/M-7015P is specifically designed for long-distance RTD measurement, and features automatic compensation for three-wire RTD, meaning that accurate measurements can be obtained regardless of the length of the wires. The I-7015 series is fully RoHS-compliant and features 4 kV ESD protection as well as 3000 VDC intra-module isolation. The M-7015/M-7015P supports both the Modbus RTU and DCON protocols, which can be configured via software, and all hardware specifications are the same as the I-7015/I-7015P.

Specification

CPU Module
Watchdog Timer Yes, Module (1.6 Seconds), Communication (Programmable)

 

Isolation
Intra-module Isolation 3000 VDC

 

EMS Protection
EFT (IEC 61000-4-4) ±4 kV for Power Line
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal

 

LED Indicators
Status 1 x Power and Communication

 

Analog Input
Channels 6
Type RTD
Sensor Type Pt100, Pt1000, Ni120, Cu50, Cu100, Cu1000
Resistance Measurement 3.2 kΩ Max.
Resolution 16-bit
Accuracy ±0.05% of FSR
Sampling Rate 12 Hz (Total)
Overvoltage Protection 120 VDC
Individual Channel Configuration Yes
Open Wire Detection Yes
3-wire RTD Lead Resistance Elimination Yes

 

COM Ports
Ports 1 x RS-485
Baud Rate 1200 ~ 115200 bps
Data Format (N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1)
Protocol DCON

 

Power
Reverse Polarity Protection Yes
Input Range +10 ~ +30 VDC
Consumption 1.2 W

 

Mechanical
Dimensions (mm) 123 x 72 x 35 (W x L x H)
Installation DIN-Rail

 

Environmental
Operating Temperature -25 ~ +75 °C
Storage Temperature -40 ~ +85 °C
Humidity 10 ~ 95% RH, Non-condensing

Download

Data sheet

Documents

Odering information

I-7015P-G     CR  6-ch RTD Input Module with 3-wire Lead Resistance Elimination using DCON Protocol (Gray Cover) (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: