Module RS-485 DCON 8 kênh đầu vào cặp nhiệt ICP DAS I-7018BL CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

8-channel Analog Input Module using the DCON Protocol

THÔNG TIN SẢN PHẨM

Features

I-7018BL
- Open Thermocouple Detection
I-7018P
- Additional Thermocouple Types, L and M
8-channel Differential or 6-channel Differential and 2-channel Single-ended Analog Input
Current, Voltage or Thermocouple Input
High Resolution: 16-bit
3000 VDC Intra-module Isolation
Dual Watchdog
RoHS Compliant
Wide Operating Temperature Range: -25 to +75°C

Introduction

The I-7018P is an Analog Input module that features current and voltage input, as well as thermocouple input. The I-7018BL is a thermocouple input module. Both of the modules provide 8-channel differential or 6-channel differential and 2-channel single ended input that can be selected via a jumper, and all channels can be configured for the same input type. Note that an optional external 125 Ω resistor is required for current input. The modules also feature 3000 VDC intra-module isolation as well as ±35 VDC overvoltage protection. The I-7018BL provides thermocouple open wire detection and the I-7018P provides support for two additional thermocouple types, L and M.

Application

Building Automation
Factory Automation
Machine Automation
Remote Maintenance
Remote Diagnosis
Testing Equipment

I/O Specification

Models		I-7018BL	I-7018P
Analog Input
Channels		Differential and Single-ended, or Differential
Wiring		Differential
Sensor Types	Thermocouple	J, K, T, E, R, S, B, N, C	J, K, T, E, R, S, B, N, C, L, M
	Voltage	-	±15 mV, ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V
	Current	-	±20 mA (requires an optional external 125 Ω resistor)
Resolution		16-bit
Accuracy		0.15% of FSR	0.1% of FSR
Sampling Rate		10 Hz
Input Impedance		> 400 kΩ
Common Voltage Protection		±15 VDC
Individual Channel Configuration		-
Overvoltage Protection		±35 VDC	±80 VDC
Open Wire Detection (for thermocouple only)		Yes	-
Temperature Output Consistency		-
Stable Temperature Output in the Field		-

Note: For highly-accurate thermocouple measurement, ICP DAS recommends selecting the I-7018Z/I-7019Z module,which features automatic cold-junction compensation for each channel, ensuring consistent and stable temperature output.

System Specification

Models	I-7018BL	I-7018P
Communication
Interface	RS-485
Bias Resistor	No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785.)
Format	(N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1)
Baud Rate	1200 to 115200 bps
Protocol	DCON
Dual Watchdog	Yes, Module (1.6 Seconds), Communication (Programmable)
LED Indicator/Display
System LED Indicator	Yes, 1 as Power/Communication Indicator
I/O LED Indicator	-
7-Segment LED Display	-
Isolation
Intra-Module Isolation, Field-to-Logic	3000 VDC
EMS Protection
ESD (IEC 61000-4-2)	±2 kV Contact for each Terminal
EFT (IEC 61000-4-4)	±4 kV to Power
Surge (IEC 61000-4-5)	±0.5 kV for Power Line
Power
Reverse Polarity Protection	Yes
Input Range	+10 ~ +30 VDC
Consumption	1.0 W
Mechanical
Dimensions (L x W x H)	123 mm x 72 mm x 35 mm
Installation	DIN-Rail or Wall Mounting
Environment
Operating Temperature	-25 to +75°C
Storage Temperature	-40 to +85°C
Humidity	10 to 95% RH, Non-condensing

Download

Manual

Data sheet

Odering information

I-7018BL CR	8-channel Analog Input Module using the DCON Protocol (Blue Cover) (RoHS)
I-7018P CR	8-channel Analog Input Module using the DCON Protocol (Blue Cover) (RoHS)
I-7018P-G CR	8-channel Analog Input Module using the DCON Protocol (Gray Cover) (RoHS)

Module RS-485 DCON 8 kênh đầu vào cặp nhiệt ICP DAS I-7018BL CR

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng