I-7065B CR: Module RS-485 DCON 4 kênh đầu vào số DI + 5 kênh đầu ra DC SSR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

I-7065B CR 4-ch Isolated DI (Wet, 4~30 VDC) and 5-ch DC-SSR Output Module using DCON Protocol (Blue Cover) (RoHS)

Gọi +84 904251826 để được trợ giúp

I-7065B CR: Module RS-485 DCON 4 kênh đầu vào số DI + 5 kênh đầu ra DC SSR

Features

• 4 Digital Input channels and 5 DC SSR Output channels
• Form A DC Solid State Relay Output
• No Arcing, No Bounce, and No Switching Noise
• Sink- and Source-type for Digital Input
• Digital Input Channels can be used as 16-bit Counters
• Configurable Power-on Value Settings
• Configurable Safe Value Settings
• Dual Watchdog
• Wide Operating Temperature Range: -25 ~ +75°C

Introduction

The I-7063B module provides 8 digital input channels and 3 DC SSR output channels, and the I-7065B provides 4 digital input channels and 5 DC SSR output channels. All digital input channels can be used as 16-bit counters. In addition, the digital input channels can be selected either as sink- or source-type via wire connections. In comparison to electromechanical relays, SSR technology provides a faster response time and greater electrical endurance. The integration of DC SSR technology also eliminates potential for arcing, bounce, and switching noise. The I-7063BD provides 11 LED indicators and the I-7065BD/M-7065BD provides 9 LED indicators that can be used to monitor the status of the digital input and SSR output. There are also options for configuring power-on and safe values. 4 kV ESD protection and 3750 VDC intra-module isolation are also provided to enhance noise protection capabilities in industrial environments. The M-7065B supports both the Modbus RTU and DCON protocols, which can be configured via software.

Specification

CPU Module
Watchdog Timer Yes, Module (1.6 Seconds), Communication (Programmable)

 

Isolation
Intra-module Isolation 3750 VDC

 

EMS Protection
EFT (IEC 61000-4-4) ±2 kV for Power Line
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal
±8 kV Air for Random Point

 

LED Indicators
Status 1 x Power and Communication

 

Digital Input/Counter
Channels 4
Type Wet Contact
Sink/Source (NPN/PNP) Sink/Source
Wet Contact, ON Voltage Level +1 VDC Max.
Wet Contact, OFF Voltage Level +4 ~ 30 VDC
Max. Counts 65535 (16-bit)
Frequency 100 Hz
Min. Pulse Width 5 ms
Input Impedance 3 kΩ
Overvoltage Protection ±35 VDC

 

Relay Output
Channels 5 (Form A)
Type DC-SSR
Contact Rating Form A:
3 ~ 30 VDC @ 1A
5 A @ 30 VDC
Leakage Current 0.1 mA
Operate Time 1 ms
Release Time 1 ms
Electrical Endurance Long Life, No Arcing, No Bounce, No Switching Noise
Surge Strength 3500 VDC
Power on Value Yes
Safe Value Yes

 

COM Ports
Ports 1 x RS-485
Baud Rate 1200 ~ 115200 bps
Data Format (N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1)
Protocol DCON

 

Power
Reverse Polarity Protection Yes
Input Range +10 ~ +30 VDC
Consumption 0.6 W

 

Mechanical
Dimensions (mm) 123 x 72 x 35 (W x L x H)
Installation DIN-Rail

 

Environmental
Operating Temperature -25 ~ +75 °C
Storage Temperature -40 ~ +85 °C
Humidity 10 ~ 95% RH, Non-condensing

Download

Data sheet

Documents

Ordering information

I-7065B     CR  4-ch Isolated DI (Wet, 4~30 VDC) and 5-ch DC-SSR Output Module using DCON Protocol (Blue Cover) (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: