I-7188XBD-CAN-G CR: Bộ điều khiển lập trình PAC CAN BUS

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

I-7188XBD-CAN-G CR I-7188 CAN Controller with Serial Port, 7-segment Display, DI and DO Channels(RoHS)

THÔNG TIN SẢN PHẨM

Features

• 2500Vrms photo-isolation protection
• Compatible with CAN specification 2.0 parts A and B
• Programmable transfer rate up to 1 Mbps
• Jumper select 120Ω terminal resistor for CAN channel
• 64-bit hardware unique serial number inside
• COM driver support interrupt & 1KB QUEUE input buffer
• COM port: COM1, COM2
• Built-in RTC, NVRAM, EEPROM
• One digital Input channel and one open collector output channel
• Built-in self-tuner ASIC controller on RS-485 port
• 7-segment LED display
• Built-in ICP DAS’s MiniOS7
• Program download port: COM1

Introduction

The I-7188XBD-CAN series PACs (Programmable Automation Controller) are powered by 80188-40 processor with 512K bytes of static RAM, and 512K bytes of Flash memory. All of them provide several communication interfaces to adapt to various applications, such as CAN port, RS-232 port and RS-485 port. Uses can program their application program flexibly with C/C++ language because of the built-in MiniOS7 operation system. Besides, the I-7188XBD-CAN series PACs have different I/O types for users to match their requirement. For I-7188XBD-CAN, it provides 1 open collector digital output channel and 1 digital input channel. It is useful for transfer the command from differential communication interface. Therefore, it can satisfy the applications with I/O demand. Therefore, the I-7188XBD-CAN series PACs are economic and convenient solution for diversification CAN application.

Specification

CPU Module
CPU	80188, 40 MHz or compatible
64-bit Hardware Serial Number	Yes, for Software Copy Protection
EEPROM	2048 Bytes (8 block, each block contains 256byte); Data retention > 100 years; 1,000,000 erase/write cycles
Flash	512 KB; Erase unit is one sector (64 KB); 100,000 erase/write cycles
NVRAM	31 bytes (battery backup, data valid for up to 10 years)
SRAM	512 KB
Real Time Clock	Yes
Watchdog Timer	CPU built-in

LED Indicators
Status	3 x Programmable

COM Ports
Ports	1 x RS-485/RS-232 (can’t be used simultaneously, screwed terminal block) 1 x RS-485 (Self-turner inside, screwed terminal block)
Baud Rate	110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps

CAN
Controller	NXP SJA1000T with 16 MHz clock
Transceiver	NXP 82C250/NXP TJA1042
Ports	1
Baud Rate	10 k ~ 1 M bps
Isolation	1000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Terminal Resistor	Jumper for 120 Ω terminal resistor
Specification	ISO-11898-2, CAN 2.0A and CAN 2.0B

Power
Input Range	+10 VDC ~ +30 VDC
Consumption	3 W

Mechanical
Casing	Plastic
Dimensions (mm)	72 x 122 x 33 (W x L x H)
Installation	DIN-Rail

Environmental
Operating Temperature	-25 ~ +75 °C
Storage Temperature	-30 ~ +80 °C
Humidity	10 ~ 90% RH, Non-condensing

Download

Data sheet

Documents

Odering informations

I-7188XBD-CAN-G CR

I-7188 CAN Controller with Serial Port, 7-segment Display, DI and DO Channels(RoHS)

I-7188XBD-CAN-G CR: Bộ điều khiển lập trình PAC CAN BUS

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng