Bộ cách ly CAN Bus ICP DAS I-7532-G CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

Two-channel CAN Bus Isolated Bridge

Gọi +84 904251826 để được trợ giúp

Bộ cách ly CAN Bus ICP DAS I-7532-G CR


  • Fully compatible with the ISO 11898-2 standard
  • Support both CAN 2.0A and CAN 2.0B
  • Selectable 120Ω terminator resistor by jumper
  • Up to 100 CAN nodes on each channel
  • 768 data frames for each CAN channel
  • Rotary switch for CAN baud rate from 5Kbps to 1Mbps or programmable user-defined CAN baud rate
  • Support CAN bus message acceptance filter configuration
  • Support firmware update via CAN1 of I-7532
  • CAN messages can be forwarded under another identifier
  • Support CAN Bus-Off Auto-Reset function
  • Support CAN Listen-Only Mode function


I-7532 is a CAN bridge that can be used to integrate two CAN networks with the different CAN baud rate. When some errors (e.g. bit error) happened on one CAN port of I-7532, the other CAN port of I-7532 will not be affected. By using I-7532, users can achieve the following application easily and suitable for any CAN protocol like CANopen, DeviceNet, J1939 etc.

(1) Extend CAN bus network distance.
(2) Connect two CAN bus networks with different baud rate.
(3) Raise the number of node in CAN bus network.
(4) Integrate multi the same CAN devices in the CAN network.


• Control System
• Building Automation
• Factory Automation
• Distributed data acquisition


Ports 2
Baud Rate 5 k ~ 1 M bps
Isolation 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Terminal Resistor Jumper for 120 Ω terminal resistor
Specification ISO-11898-2, CAN 2.0A and CAN 2.0B
Filter Yes
Time Delay [ 1Mbps (8-byte Data) ] ID-29bit => 156 us ; ID-11bit => 134 us
[ 5Kbps (8-byte Data) ] ID-29bit => 30 ms ; ID-11bit => 25 ms
Input Range +10 VDC ~ +30 VDC
Consumption 2 W
Casing Plastic
Dimensions (mm) 72 x 122 x 33 (W x L x H)
Installation DIN-Rail
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing




Ordering Information

I-7532-G     CR  Two-channel CAN Bus Isolated Bridge (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: