Bộ chuyển đổi CAN sang Ethernet Wi-Fi ICP DAS I-7540D-WF CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

CAN to Wi-Fi Converter (Asia Only)

Gọi +84 904251826 để được trợ giúp

Bộ chuyển đổi CAN sang Ethernet Wi-Fi ICP DAS I-7540D-WF CR


  • IEEE 802.11b/g compliant
  • Wireless data transmission via WLAN
  • Two different operation modes: infrastructure and ad-hoc
  • point to point or point to multi-points connection via wireless LAN
  • Supports WEP, WPA and WPA2 encryption for wireless LAN
  • CAN 2.0A/2.0B compliant
  • Connect CAN networks via a WLAN bridge
  • Communication efficiency: one-way is up to 700 fps (client->server, server->client),two-way 350 fps (client<=>server)
  • Wireless transmission distance: up to 100 meters


The I-7540D-WF supports the wireless transmission of CAN data between a CAN network and a WLAN network according to the 802.11b/g standard. It provides CAN to WLAN converter functionality together with wireless transparent transmission on the CAN network. The I-7540D-WF is highly suitable for connecting mobile (e.g., vehicles or machines) or stationary CAN networks and is often used in short ranges up to 100 m. Using an appropriately configured router, CAN data can be determined to pass or filter from the CAN networks to the Ethernet. The wireless connection that is established between two I-7540DWF units can be used instead of a cable, and enables the connection of CAN networks that would otherwise be difficult to link such as rotational machineries.


  • Factory Automation
  • Building Automation
  • Home Automation
  • Control System
  • Monitor System
  • Vehicle Automation


LED Indicators
Status 1 x Power
1 x Wi-Fi
1 x CAN
1 x WLAN
1 x TCP connection
Transmission Distance (LoS) 100 m
Standard IEEE 802.11b/g
RX Sensitivity -87dBm @802.11b / -72dBm @802.11g
Output Power 14dBm @802.11b / 12dBm @802.11g
Operation Mode Infrastructure & Ad-hoc
Frequency 2.412GHz ~ 2.484GHz
Encryption WEP, WPA and WPA2
Antenna 5 dBi (Omni-Directional)
COM Ports
Ports 1 x RS-232
(10-pin screw terminal block (TXD, RXD, GND))
Baud Rate 115200
Controller CAN Controller inside
Ports 1
Baud Rate 5 k ~ 1 M bps
Isolation 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Terminal Resistor Selectable 120Ω terminal resistor by jumper
Specification ISO-11898-2, CAN 2.0A and CAN 2.0B
Filter Yes
Pin Assignment 10-pin screw terminal connecter
Data Flow 700 fps(peak value, one-way)
Input Range +10 VDC ~ +30 VDC
Consumption 1.5 W
Casing Plastic
Dimensions (mm) 76 x 117 x 37 (W x L x H)
Installation DIN-Rail
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing




Ordering Information

I-7540D-WF     CR  CAN to Wi-Fi Converter (RoHS) (Asia Only)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: