Bộ chuyển đổi USB sang CAN BUS ICP DAS I-7565-G CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

I-7565-G CR Intelligent USB to CAN converter (Plastic Case) (RoHS) Includes CA-USB18(1.8M Cable).

Gọi +84 904251826 để được trợ giúp

Bộ chuyển đổi USB sang CAN BUS ICP DAS I-7565-G CR

Tính năng

  • Fully compliant with USB 1.1/2.0(Full Speed)
  • Fully compatible with the ISO 11898-2 standard
  • No external power supply is required as I-7565 takes it's power from the USB bus
  • Transmission speed up to 1M bps for CAN and 921.6K bps for USB
  • Support both CAN 2.0A and CAN 2.0B
  • Built-in jumper to select 120 ohm terminal resister
  • Power, data flow and error indicator for CAN and USB
  • 1000 frames in CAN received buffer
  • Watchdog inside
  • Windows 98/ME/2000/XP/Vista/Win 7/Win 10 and Linux drivers support
  • Able to configure the CAN baud rate for each channel using a rotary switch
  • Extends the CAN transmission distance

Note: We have verified to drive 100 CAN nodes at the same time via one CAN port of I-7565.

Giới thiệu

CAN (Controller Area Network) is a serial bus system especially suited to structure intelligent industry devices networks and build smart automatic control systems. The I-7565 is a cost-efficient device for coupling the CAN-bus to the PC using the standard USB interface by the MS-Windows 98, Me, 2000, XP, Win 7 and Win 10 operating systems. If you establish the connection between the I-7565 and the PC during the runtime of the computer, the PC automatically loads the relevant device driver (hot plug & play).

The following figure shows the application architecture for I-7565 modules. The PC can be the CAN host, monitor or HMI to access/control the CAN device through the CAN network by the I-7565 Converter. This module let you to communicate with CAN devices easily from PC with USB interface.

3000V isolation on CAN side

The CAN port of I-7565 is an isolated with 3000V isolation. This isolation can protect the local devices from the damage signal coming from CAN network.

Watchdog inside

The I-7565 Watchdog is a hardware reset circuit to monitor the I-7565’s operation status. When working in harsh or noisy environment, the I-7565 may be down by the external signal. The circuit may let the I-7565 to work continuously and never halt.

Power and Error indicator display

There are two indicators on the I-7565.The power indicator can help user to check whether the I-7565 is standby or transmitting/receiving messages. The Error indicator will be turned on when some errors occur on the I-7565.

Ứng dụng

  • Factory Automation
  • Building Automation
  • Home Automation
  • Control System
  • Monitor System
  • Vehicle Automation

Thông số kỹ thuật

LED Indicators
Status 1 x Power
1 x CAN status
Specification USB 1.1 and 2.0 standard
Connector 1 x USB (Type B)
Driver Windows 2000/XP//7
Receive Buffer 900 data frames
Ports 1
Baud Rate 10 k ~ 1 M bps
Isolation 3000 Vrms on the CAN side
Terminal Resistor Selectable 120 Ω terminal resistor by jumper
Specification CAN 2.0A/2.0B
Filter Yes
Receive Buffer 1000 data frames
Input Range USB power delivery
Consumption 1.5 W
Casing Plastic
Dimensions (mm) 72 x 112 x 33 (W x L x H)
Installation DIN-Rail
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing


Data sheet


Thông tin mua hàng

I-7565-G     CR  Intelligent USB to CAN converter (Plastic Case) (RoHS)
Includes CA-USB18(1.8M Cable).

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: