Tổng tiền thanh toán:
Sản phẩm đã được thêm vào giỏ hàng
I-7565-H2-G CR High Performance Intelligent USB to 2-port CAN bus converter (Plastic Case) (RoHS) Includes CA-USB18 (1.8M Cable)
I-7565-H2-G CR: Bộ chuyển đổi USB sang 2 cổng CAN BUS
Note: We have verified to drive 100 CAN nodes at the same time via one CAN port of I-7565-H2.
I-7565-H2 are the high performance intelligent USB to CAN converters with one and two CAN channels separately. They improve the transformation speed of the I-7565, and allows receiving max. 3000 standard 2.0A CAN frames per second. Both I-7565-H2 support CAN2.0A/2.0B protocol and different baud rates from 5 Kbps to 1 Mbps. The important feature of I-7565-H2 is to support the user-defined baud rate function no matter what the baud rate is. When connecting I-7565-H2 to PC, PC will load the relevant device driver automatically (hot plug & play). Therefore, users can make data collection and processing of CAN bus network easier and quicker by applying I-7565-H2. The application fields can be CAN bus monitoring, building automation, remote data acquisition, environment control and monitoring, laboratory equipment & research, factory automation, etc.
The following is the application structure for these two USB/CAN modules. The PC can be the CAN host, monitor or HMI to access/control the CAN device through the CAN network by the I-7565-H1/H2 Converter. These modules let users to communicate with CAN devices easily from PC with USB interface.
I-7565-H2: High Performance intelligent USB to 2- port CAN bus Converter.
2500Vrms isolation on CAN side
The CAN port of I-7565-H2 is isolated with 2500Vrms. This isolation can protect the local devices from the damage signal coming from CAN network.
The I-7565-H2 Watchdog is a hardware reset circuit to monitor the operation status of I-7565-H2. When working in a harsh or noisy environment, the I-7565-H2 may be down by the external signal. The circuit may let the I-7565-H2 work continuously and never halt.
Power / Communication / Error indicator display
There are three indicators on the I-7565-H2.The power indicator can help user to check whether the I-7565-H2 is standby. The communication indicator is used to show whether the I-7565-H2 is transmitting/receiving messages. The Error indicator will be turned on when some errors occur on the I-7565-H2.
|Library||VB 6.0, VC++ 6.0, C#.Net, VB.Net, LabVIEW, Linux|
|Status||1 x Power
2 x CAN status
|Specification||USB 1.1 and USB 2.0 standard|
|Transfer Speed||12M kbps|
|Connector||1 x USB (Type B)|
|Driver||Windows 2000/XP/7/8/10, Linux|
|Receive Buffer||100 data frames|
|Baud Rate||5 k ~ 1 M bps|
|Isolation||3000VDC for DC-to-DC
2500Vrms for photo-couple
|Terminal Resistor||Selectable 120Ω terminal resistor by jumper|
|Specification||ISO-11898-2, CAN 2.0A and CAN 2.0B|
|Receive Buffer||128 data frames for each CAN port|
|Pin Assignment||(CAN1: CAN_H=4, CAN_L=2 ) / (CAN2: CAN_H=9, CAN_L=7 )|
|Data Flow||3000 fps (Total CAN ports)|
|Input Range||USB power delivery|
|Dimensions (mm)||72 x 108 x 35 (W x L x H)|
|Operating Temperature||-25 ~ +75 °C|
|Storage Temperature||-30 ~ +80 °C|
|Humidity||10 ~ 90% RH, Non-condensing|
|I-7565-H2-G CR||High Performance Intelligent USB to 2-port CAN bus converter (Plastic Case) (RoHS)
Includes CA-USB18 (1.8M Cable)