I-7567 CR: Bộ chuyển đổi USB sang HART

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

I-7567 CR:  USB To HART Converter (Gray Cover) (RoHS)

Gọi +84 904251826 để được trợ giúp

I-7567 CR: Bộ chuyển đổi USB sang HART


  • Support HART Short/Long frame
  • Support HART Burst mode
  • Support point-to-point or multi-drop HART mode
  • Support connecting up to 15 HART slave devices
  • Allow two HART masters
  • Provide utility tool for module configuration and HART communication
  • No external power supply (powered by USB)
  • Support firmware update via USB
  • Provide PWR / Tx / Rx indication LED
  • 4KV ESD Protection
  • Selectable 250Ω load resistor
    ( HART OPC Server : http://www.hartcomm.org/hcf/documents/documents_opc.html => for 30 day trial of the full licensed version )
  • Support FDT (Field Device Tool) technique and the below FDT software have been tested OK

(1) PACTware (PACTware)

(2) FieldCare (Endress+Hauser)

(3) PDM (Seimens)


I-7567 is a USB to HART converter and can be used as a HART master with HC_Tool utility or a HART slave with HDS utility.

(1) I-7567 as HART Master :

It allows users to access the HART slave via virtual COM-port of PC. When connecting I-7567 to PC, PC will load the relevant device driver automatically (hot plug & play). Therefore, users can make data collection and processing of HART network easier and quicker by applying I-7567. In addition, by using the I-7567 utility, users can configure module and test HART communication easily.

(2) I-7567 as HART Slave :

HART Device Simulator (called HDS) is the HART device simulation software developed by ICP DAS. It can be used to simulate multi HART slave devices simultaneously to exchange data with HART master device by using ICP DAS HART converter (like: I-7567 / I-7570 / I-7547) connected to any COM port (USB / 232 / 485 / Ethernet). By this way, users can develop or verify the HART master program without any HART slave device.


Driver Windows 2000 / XP / Vista / 7 (32/64 bit)


LED Indicators
Status PWR : Power Indicator
Tx : Received Data from USB Indicator
Rx : Received Data from HART Indicator


Specification USB 1.1 and 2.0 standard
Connector USB Type B
Virtual COM Parameter 1200 bps, O(odd parity), 8(data bit), 1(stop bit)


Ports 1
Terminal Resistor Selectable 250 Ω terminal resistor
Isolation 3000 VDC


Input Range By USB Interface
Consumption Maximum : 1.5W


Dimensions (mm) 108 x 72 x 35 (H x W x D)
Installation DIN-Rail or Wall Mounting


Operating Temperature -25 ~ +75 °C (-13 to 167 ℉)
Storage Temperature -30 ~ +75 °C (-22 to 167 ℉)
Humidity 5% ~ 95%, Non-condensing

Ordering information

I-7567     CR  USB To HART Converter (Gray Cover) (RoHS)




Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: