I-8090W-G CR: Module 3 trục đầu vào Encoder

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

I-8090W-G CR 3-axis Encoder Input Module (RoHS) (Only suitable for iPAC-8000 and ISaGRAF PAC)

THÔNG TIN SẢN PHẨM

Features

• 3-axis, 16-bit Encoder Counter
• 32-bit Encoder Counter by Software
• Maximum Counting Rate: 1M pulse/sec
• Diﬀerential Input A+, A-, B+, B-, C+, C-
• Quadrant Counting Mode, CW/CCW Counting Mode, Pulse/Dir Counting Mode
• 2500 Vrms Optical Isolation

Introduction

I-8090W is a 3-axis encoder counter board on iPAC-8000 platform. Its each axis can be independently conﬁgured as one of Quadrant, Pulse/Direction or CW/CCW input mode. The maximum input rate for Quadrant mode is 1 MHz. The application of I-8090W board is position/distance measurement, velocity measurement, feedback for motor control, handwheel input and so on.

Specification

Isolation
Intra-module Isolation	2500 Vrms

EMS Protection
ESD (IEC 61000-4-2)	± 4 kV Contact for Each Terminal

LED Indicators
Status	1 x Power and Communication 8 x I/O

Encoder Input
Resolution	16-bit (32-bit encoder counter by software)
No. of Axes	3-axis
Mode	1. Quadrant Counting 2. CW/CCW 3. Pulse/Dir
Counting Rate	1 MHz

Power
Consumption	3.4 W Max.

Mechanical
Dimensions (mm)	30.5 x 86 x 114 (W x L x H)

Environmental
Operating Temperature	-25 ~ +75 °C
Storage Temperature	-40 ~ +85 °C
Humidity	10 ~ 90% RH, Non-condensing

Download

Data sheet

Documents

Ordering information

I-8090W-G CR

3-axis Encoder Input Module (RoHS)
(Only suitable for iPAC-8000 and ISaGRAF PAC)

I-8090W-G CR: Module 3 trục đầu vào Encoder

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng